388800

Bosch gbh 24 0 vre Manual

23
Zoom out
Zoom in
Previous page
1/282
Next page
English | 23
Bosch Power Tools 1 619 929 740 | (24.7.07)
Removing SDS-plus Drilling Tools
(see figure G)
Push back the locking sleeve 3 and remove the
tool.
Inserting Drilling Tools without SDS-plus
(GBH 24 VFR) (see figure H)
Note: Do not use drilling tools without SDS-plus
for hammer drilling! Drilling tools without SDS-
plus as well as the tool holder are damaged
when used for hammer drilling.
Insert the quick change keyless chuck 19.
Firmly hold the retaining ring of the quick
change keyless chuck 19. Open the quick
change keyless chuck by turning the front sleeve
in the direction of the symbol “ ”.
Insert the drilling tool into the quick change key-
less chuck 19. Firmly hold the retaining ring of
the quick change keyless chuck 19 and turn the
front sleeve in the direction of the symbol
“ ”.
Set the selector switch 6 to the “Drilling” sym-
bol.
Removing Drilling Tools without SDS-plus
(GBH 24 VFR) (see figure H)
Firmly hold the retaining ring of the quick
change keyless chuck 19. Open the quick
change keyless chuck by turning the front sleeve
in the direction of the symbol “ ”.
Remove the drilling tool.
Inserting Drilling Tools without SDS-plus
(GBH 24 VRE)
Note: Do not use drilling tools without SDS-plus
for hammer drilling! Drilling tools without SDS-
plus as well as the tool holder are damaged
when used for hammer drilling.
Insert the key type drill chuck 17.
Open the key type drill chuck 17 by turning until
the tool can be inserted. Insert the tool.
Insert the chuck key into the corresponding
holes of the key type drill chuck 17 and clamp
the tool uniformly.
Set the selector switch 6 to the “Drilling” sym-
bol.
Removing Drilling Tools without SDS-plus
(GBH 24 VRE)
Turn the sleeve of the key type drill chuck 17
with the drill chuck key in anticlockwise direc-
tion until the drilling tool can be removed.
Operation
Starting Operation
Inserting the Battery
f Use only original Bosch O-pack batteries
with the voltage given on the type plate of
your machine. The use of other batteries can
lead to injuries and danger of fire.
Before inserting the battery, remove the protec-
tion cap 15, if required. (see figure B)
Set the rotational direction switch 7 to the cen-
tre position in order to avoid unintentional start-
ing. Insert the charged battery 11 into the han-
dle so that it can be felt to engage and faces
flush against the handle.
Setting the Operating Mode
f Actuate the selector switch for drill-
ing/hammer drilling 6 only when the power
tool is at a standstill.
Hammer drilling
Set the selector switch 6 to the
“Hammer drilling” symbols.
Drilling
Set the selector switch 6 to the
“Drilling” symbol.
OBJ_BUCH-372-001.book Page 23 Tuesday, July 24, 2007 1:31 PM
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch gbh 24 0 vre at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gbh 24 0 vre in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info