Manual Bosch gbh 24 0 vre (page 21 of 282) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

388800

Zoom out

Zoom in

1/282

English | 21

Bosch Power Tools 1 619 929 740 | (24.7.07)

29.06.2007, Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

Assembly

f Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

Battery Charging

A battery that is new or has not been used for a

longer period does not develop its full capacity

until after approx. 5 charging/discharging cy-

cles.

To remove the battery 11, press the battery re-

lease button 14 and pull the battery downward

out of the power tool. Do not exert any force.

(see figure A)

The battery is equipped with a NTC temperature

control which allows charging only within a tem-

perature range of between 0 °C and 45 °C. A

long battery service life is achieved in this man-

ner.

A significantly reduced working period after

charging indicates that the battery is used and

must be replaced.

Observe the notes for disposal.

Battery Charge-control Indication

The battery charge-control indicator 10 indi-

cates the charge condition of the battery 11 dur-

ing the working procedure.

Push button 9 to indicate the charge condition

when the battery is removed or when the power

tool is switched off. The battery charge-control

indicator automatically goes out after approx.

5seconds.

When the first indicator element (0

– 10%)

flashes, the battery is almost completely dis-

charged and must be recharged again.

Discharge the battery occasionally until the

speed of the power tool reduces significantly

and the battery charge-control indicator 10

completely goes out. Frequent charging after

short-term usage impairs the indication accura-

cy and the service life of the battery.

Auxiliary Handle

f Operate your machine only with the auxilia-

ry handle 12.

The auxiliary handle 12 can be set to any position

for a secure and low-fatigue working posture.

Turn the bottom part of the auxiliary handle 12

in counterclockwise direction and swivel the

auxiliary handle 12 to the desired position. Then

retighten the bottom part of the auxiliary handle

12 by turning in clockwise direction.

Adjusting the Drilling Depth (see figure C)

The required drilling depth X can be set with the

depth stop 13.

Press the button for the depth stop adjustment

5 and insert the depth stop into the auxiliary

handle 12.

Insert the SDS-plus drilling tool to the stop into

the SDS-plus tool holder 1. Otherwise, the mov-

ability of the SDS-plus drilling tool can lead to

incorrect adjustment of the drilling depth.

Pull out the depth stop until the distance be-

tween the tip of the drill bit and the tip of the

depth stop correspond with the desired drilling

depth X.

The knurled surface of the depth stop 13 must

face upward.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

0 – 10 %

10 – 20 %

20 – 40 %

40 – 60 %

60 – 80 %

80 – 100 %

OBJ_BUCH-372-001.book Page 21 Tuesday, July 24, 2007 1:31 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gbh 24 0 vre in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gbh 24 0 vre Manual

Product: