Manual Bosch gbh 24 0 vre (page 22 of 282) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

388800

Zoom out

Zoom in

1/282

22 | English

1 619 929 740 | (24.7.07) Bosch Power Tools

Selecting the Tool Holder

For hammer drilling, SDS-plus drilling tools that

can be inserted into the SDS-plus tool holder 1

are required.

For drilling without impact in wood, metal, ce-

ramic and plastic, use non-SDS-plus drilling

tools (e. g. drill bits with cylindrical shank). A

keyless or a key type drill chuck is required for

such drilling tools.

Note: Do not use drilling tools without SDS-plus

for hammer drilling! Drilling tools without SDS-

plus as well as the tool holder are damaged

when used for hammer drilling.

GBH 24 VFR: The SDS-plus tool holder 1 can

easily be exchanged against the keyless replace-

ment chuck 19 provided.

Changing the Tool Holder

Dismounting the SDS-plus Tool Holder or the

Quick change keyless chuck (see figure D)

Pull the lock ring of the tool holder 4 firmly in

the direction of the arrow, hold it in this position

and pull off the tool holder 1 or the keyless re-

placement chuck 19 toward the front.

After removing, protect the tool holder 1 or the

quick change keyless chuck 19 against contami-

nation. Lightly lubricate the engaging grooves, if

required.

Mounting the SDS-plus Tool Holder or the

Quick change keyless chuck

Grasp the tool holder 1 or the keyless replace-

ment chuck 19 completely with your hand. Slide

the tool holder 1 or the keyless replacement

chuck 19 with a turning motion onto the drill

chuck mounting until a distinct latching noice is

heard.

The tool holder 1 or the quick change keyless

chuck 19 is automatically locked. Check the

locking effect by pulling the tool holder.

Changing the Key Type Drill Chuck

(GBH 24 VRE) (see figure E)

Mounting the Key Type Drill Chuck

Screw the SDS-plus adapter shank 18 into a key

type drill chuck 17. Secure the key type drill

chuck 17 with the securing screw 16. Please ob-

serve that the securing screw has a left-hand

thread.

Clean the shank end of the adapter shank and

apply a light coat of grease.

Insert the key type drill chuck with the adapter

shank into the tool holder with a turning motion

until it automatically locks.

Check the locking effect by pulling the key type

drill chuck.

Dismounting the Key Type Drill Chuck

Push the locking sleeve 3 toward the rear and

pull out the key type drill chuck 17.

Changing the Tool

With the SDS-plus tool holder, simple and con-

venient tool changing is possible without addi-

tional aids.

As a requirement of the system, the SDS-plus

drilling tool can move freely. This causes a cer-

tain radial run-out at no-load, which has no ef-

fect on the accuracy of the drill hole, as the drill

bit centres itself upon drilling.

The dust protection cap 2 largely prevents the

entry of drilling dust into the tool holder during

operation. When inserting the tool, take care

that the dust protection cap 2 is not damaged.

f A damaged dust protection cap should be

changed immediately. We recommend hav-

ing this carried out by an after-sales serv-

ice.

Inserting SDS-plus Drilling Tools (see figure F)

Clean and lightly grease the shank end of the

tool.

Insert the tool in a twisting manner into the tool

holder until it latches itself.

Check the latching by pulling the tool.

OBJ_BUCH-372-001.book Page 22 Tuesday, July 24, 2007 1:31 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gbh 24 0 vre in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gbh 24 0 vre Manual

Product: