544331

Bosch D-tect 150 Manual

23
Zoom out
Zoom in
Previous page
1/345
Next page
English | 23
Bosch Power Tools 1 609 929 X40 | (30.8.10)
Display Elements (see figure A)
If an object is under the sensor, it will appear in
the sensor range c of the display. Depending on
size and depth of the object, identification of
the material is possible. The allowable drilling
depth l to the upper edge of the found object is
indicated in the status line.
Note: Both the indication of the allowable drill-
ing depth l as well as the material property m re-
fer to the object pictured black in the sensor.
The indication of the object material m can rep-
resent the following characteristics:
– Magnetic, e.g. reinforcing steel
– Non-magnetic, but metal, e.g. copper
pipe
– Non-metal, e.g. wood or plastic
– Material property unknown
The indication of “live” wires n can represent
the following characteristics:
–“Live”
Note: For “live” objects, no further character-
istic is displayed.
– Not definite whether “live” or voltage-
free
Note: Three-phase mains wiring are possibly not
detected as “live” conductors.
Localisation of Objects
To localise objects, moving over the measuring
path once is sufficient.
When no object has been found, repeat the mo-
tion perpendicular to the initial measuring direc-
tion (see “Method of Operation”, page 21).
For precise localisation and marking of an ob-
ject, move the measuring tool back over the
measuring path.
When an object is indicated centrally below the
centre line k in display 16, as in the example,
you can mark it coarsely with the top marking
aid 1. This mark, however, will only be precise,
when the object is positioned exactly vertical in
the wall, as the sensor range is located some-
what below the top marking aid.
For exact marking of the object on the wall,
move the measuring tool left or right until the
found object is positioned below one of the out-
er edges. When the found object, as an example,
is indicated centrical below the dashed right-
hand line g in display 16, you can mark it pre-
cisely with the right marking aid 3.
The direction of a found object in a wall can be
determined by carrying out several offset meas-
urements one after another (see figure I and
“Examples for Measuring Results”, page 26).
Mark and connect the respective measuring
points.
By pressing the start button 11, the display of
the objects found can be deleted at any time
and a new measurement started.
Changing the Operating Modes
Changing between different operating modes is
possible with selection buttons 10 and 12.
– Briefly press selection button 10 to select
the next operating mode.
– Briefly press selection button 12 to select
the previous operating mode.
By selecting the operating modes, you can adapt
the measuring tool to different wall materials
and suppress insignificant objects (e.g. hollow
spaces in brickwork). The current setting is al-
ways shown in the operating-mode indication h
of the display.
N
S
N
S
Metal
N
S
?
?
?
Se
t
u
p
Universal mode
Pre
v
Nex
t
6
4
2
0 cm
6
4
2
0 cm
Sensor
N
S
1.5 cm
1
Se
t
u
p
Universal mode
P
re
v
N
ex
t
6
4
2
0 cm
6
4
2
0 cm
Sensor
N
S
1.5 cm
3
OBJ_BUCH-844-006.book Page 23 Monday, August 30, 2010 10:44 AM
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch D-tect 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch D-tect 150 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info