544331

Bosch D-tect 150 Manual

25
Zoom out
Zoom in
Previous page
1/345
Next page
English | 25
Bosch Power Tools 1 609 929 X40 | (30.8.10)
“Settings” Menu
To access the “Settings” menu, press the setup
button 14.
To exit the menu, press the start button 11. The
current settings are saved. The standard start
display for the measuring process is activated.
Navigating in the Menu
Press the setup button 14 to scroll down.
Press the selection buttons 10 and 12 to select
the values:
– Selection button 10 will select the right-hand
or next value.
– Selection button 12 will select the left-hand
or previous value.
Language
In the “Language” menu, you can change the
language of the menu navigation. The default
setting is “English”.
Cut-off Time
In the “Cut-off time” menu, you can set certain
time intervals after which the measuring tool
shall automatically shut off when no measure-
ments are taken or settings are carried out. The
default setting is “5 min”.
Light Duration
In the “Light duration” menu, you can set a time
interval within which the display 16 shall be illu-
minated. The default setting is “30 s”.
Brightness
In the “Brightness” menu, you can adjust the
brightness of the display backlight. The default
setting is “Max”.
Tone Signals
In the “Tone signal” menu, you can limit when
the measuring tool shall emit an audio signal. The
precondition for this is that the signal has not
been switched off via the audio signal button 13.
– The default setting is “Wallobjects”: An audio
signal sounds after each button press, and
whenever a wall object is under the sensor
range. Additionally, a short-beat warning sig-
nal is given for “live” wires.
– With the setting “Live wire”, an audio signal
sounds after each button press, as does the
warning signal for “live” wires (short-beat
signal), when the measuring tool indicates a
power line.
– With the setting “Keyclick”, a tone signal
only sounds after a button press.
Default Mode
In the “Defaultmode” menu, you can set the de-
fault operating mode that is to be pre-set after
switching on the measuring tool. The default
setting is “Universal mode”.
“Extended Settings” Menu
To access the “Extended settings” menu, press
the setup button 14 and the On/Off button 15 at
the same time when the measuring tool is
switched off.
To exit the menu, press the start button 11. The
standard start display for the measuring proc-
ess is activated and the settings are saved.
Navigating in the Menu
Press the setup button 14 to scroll down.
Press the selection buttons 10 and 12 to select
the values:
– Selection button 10 will select the right-hand
or next value.
– Selection button 12 will select the left-hand
or previous value.
Device Information
In the “Device Infos” menu, you can access in-
formation on the measuring tool, e.g. the “Oper-
ation Time”.
In the “Restore Settings” menu, you can restore
the factory settings.
OBJ_BUCH-844-006.book Page 25 Monday, August 30, 2010 10:44 AM
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch D-tect 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch D-tect 150 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info