544331

Bosch D-tect 150 Manual

26
Zoom out
Zoom in
Previous page
1/345
Next page
26 | English
1 609 929 X40 | (30.8.10) Bosch Power Tools
Examples for Measuring Results
Note: In the following examples, the audio sig-
nal on the measuring tool is switched on.
Depending on the size and depth of the object
under the sensor range, it is not always possible
to positively determine whether this object is
“live” or voltage-free. In this case, the sym-
bol will appear in indicator n.
“Live” Wire (see figure C)
A “live”, metal object (e.g. a power cable) is
within the sensor range. The allowable drilling
depth is 1.5 cm. The measuring tool emits the
warning signal for “live” conductors as soon as
the power cable is detected by the sensor.
Steel Bar (see figure D)
A magnetic object (e.g. a steel bar) is within the
sensor range. Further objects are also located to
the left and right, outside of the sensor range.
The allowable drilling depth is 8.8 cm. The
measuring tool emits an audio signal.
Copper Pipe (see figure E)
A metal object (e.g. a copper pipe) is within the
sensor range. The allowable drilling depth is
4 cm. The measuring tool emits an audio signal.
Plastic or Wooden Object (see figure F)
A non-metal object is within the sensor range. The
object is plastic or wooden, and close to the
surface. The measuring tool emits an audio signal.
Large Surface (see figure G)
A metal, large surface (e.g. a metal plate) is within
the sensor range. The allowable drilling depth is
2 cm. The measuring tool emits an audio signal.
Many Unclear Signals (see figures H–I)
When many objects are shown in the standard
start display, the wall probably consists of many
hollow spaces (hollow blocks). To broadly block
out the hollow spaces, switch to the “Hollow
block” operating mode. When there are still too
many objects being shown, carry out several
height-offset measurements and mark the de-
tected objects on the wall. Offset marks are an
indication for hollow spaces, whereas marks on
a line indicate an object.
Maintenance and Service
Maintenance and Cleaning
f Check the measuring tool each time before
use. In case of visible damage or loose com-
ponents inside the measuring tool, safe func-
tion can no longer be ensured.
Keep the measuring tool clean and dry at all
times to ensure proper and safe working.
Do not immerse the measuring tool in water or
other fluids.
Wipe away debris or contamination with a dry,
soft cloth. Do not use cleaning agents or solvents.
Pay attention that the maintenance
flap 7 is always properly closed. The
maintenance flap may only be
opened by an authorised after-sales
service centre for Bosch power tools.
If the measuring tool should fail despite the care
taken in manufacturing and testing procedures,
repair should be carried out by an authorised af-
ter-sales service centre for Bosch power tools.
Do not open the measuring tool yourself.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the measuring tool.
Store and transport the measuring tool only in
the supplied protective pouch.
In case of repairs, send in the measuring tool
packed in its protective pouch 18.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
?
OBJ_BUCH-844-006.book Page 26 Monday, August 30, 2010 10:44 AM
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch D-tect 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch D-tect 150 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info