Manual Bosch D-tect 150 (page 21 of 345) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544331

Zoom out

Zoom in

1/345

English | 21

Bosch Power Tools 1 609 929 X40 | (30.8.10)

Method of Operation (see figure B)

The measuring tool

checks the base mate-

rial of sensor area 9 in

measurement direction

A to the displayed

measuring depth. Meas-

urement is possible

only during movement

of the measuring tool in

the direction of travel B

and for a measuring dis-

tance of at least 10 cm.

Move the measuring

tool in a straight line with light pressure over

the wall so that the wheels remain in contact

with the wall. Objects are detected that differ

from the material of the wall. The allowable

drilling depth and, if possible, the object mate-

rial, are indicated on the display.

Optimum results are achieved when the meas-

ured distance is at least 40 cm and the measur-

ing tool is moved slowly over the entire location

to be checked. The tool’s method of operation

ensures reliable detection of outer object edges

that run transverse to the measuring tool’s

movement direction.

Therefore, always move crossways over the

area to be checked.

If several objects are located one over the other

in the wall, the object that is indicated in the dis-

play is the one nearest to the surface.

The representation of the properties of detect-

ed objects in the display 16 can deviate from the

actual object properties. This applies particular-

ly for very thin objects, which are represented

thicker in the display. Large cylindrical objects

(e.g. plastic or water pipes) can appear in the

display smaller than they actually are.

Detectable Objects

– Plastic pipes (e.g. water-carrying plastic

pipes, as used in floor/wall-heating systems,

with at least 10 mm in diameter; empty pipes

with at least 20 mm in diameter)

– Electrical wiring (independent of whether

carrying voltage or not)

– Three-phase mains wiring (e.g. to the stove)

– Low-voltage wiring (e.g. for door bell, tele-

phone

– Metal pipes, bars, beams of any type (e.g.

steel, copper, aluminium)

– Reinforcing steel

– Wooden beams

– Hollow spaces

Measurements possible

– In brickwork (bricks, porous concrete, foam

concrete, aerated concrete, lime-sand brick)

– In concrete/reinforced concrete

– In light construction walls

– Under surfaces such as stucco, tiles, wall-

paper, parquet flooring, carpet

– Behind wood, gypsum board

Special Measuring Cases

Based on the measuring priniciple, unfavourable

conditions can influence the measuring result,

for example:

– Multi-layered walls

– Empty plastic pipes and wood beams in hol-

low spaces and light construction walls

– Objects running inclined in walls

– Metal surfaces and damp areas; in walls,

these can possibly be indicated as an object

(e.g. when the water content is high).

Please observe that concrete requires sever-

al months to dry completely.

– Hollow spaces in a wall; these can be indicat-

ed as objects.

– Closeness to equipment that generates

strong magnetic or electromagnetic fields,

e.g. radio base stations or generators.

SENSO

OBJ_BUCH-844-006.book Page 21 Monday, August 30, 2010 10:44 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch D-tect 150 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch D-tect 150 Manual

Product: