544331
22
Zoom out
Zoom in
Previous page
1/345
Next page
22 | English
1 609 929 X40 | (30.8.10) Bosch Power Tools
Initial Operation
f Protect the measuring tool against mois-
ture and direct sun light.
Switching On and Off
f Before switching the measuring tool on,
make sure that the sensor area 9 is not
moist. If required, dry the measuring tool us-
ing a soft cloth.
f If the measuring tool was subject to an ex-
treme temperature change, allow it to ad-
just to the ambient temperature before
switching on.
Switching On
–To switch on the measuring tool, press the
On/Off button 15 or the start button 11.
–LED 17 lights up green and the start display
is indicated for 4 s on display 16.
When no measurement is carried out and no
button is pressed for 5 minutes, the measur-
ing tool switches off automatically. This
“Cut-off time” can be changed in the “Set-
tings” menu (see “Cut-off Time”, page 25).
Switching Off
–To switch the measuring tool off, press the
On/Off button 15.
When switching off the measuring tool, all
settings are retained in the menus.
Switching the Audio Signal On/Off
The audio signal can be switched on/off with the
audio signal button 13. This “Tone signal” can
be changed in the “Settings” submenu (see
“Tone Signals”, page 25).
Measuring Procedure
Switch the measuring tool on. The “standard
start display” appears on display 16.
Position the measuring tool against the wall and
move it over the wall in the direction of travel
(see “Method of Operation”, page 21). Meas-
ured results are indicated on display 16 after a
minimum measuring distance of 10 cm. To en-
sure correct measurement results, move the
measuring tool slowly and completely over the
assumed object in the wall.
If the measuring tool is lifted away from the wall
during a measurement, the last measured result
remains on the display. “Hold” appears on the
sensor-range indicator c. When the measuring
tool is placed against the wall again, moved on
or when the start button 11 is pressed, the
measurement starts anew.
When LED 17 lights up red, an object is in the
sensor range. When LED 17 lights up green, no
object is in the sensor range. When LED 17
flashes, a “live” object is in the sensor range.
f Before drilling, sawing or routing into a
wall, protect yourself against hazards by us-
ing other information sources. As the meas-
uring results can be influenced through ambi-
ent conditions or the wall material, there may
be a hazard even though the indicator does
not indicate an object in the sensor range
(LED 17 lit green).
6
4
2
0 cm
6
4
2
0 cm
Sensor
Universal mode
Prev Next
Move
OBJ_BUCH-844-006.book Page 22 Monday, August 30, 2010 10:44 AM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch D-tect 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch D-tect 150 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info