544331
20
Zoom out
Zoom in
Previous page
1/345
Next page
20 | English
1 609 929 X40 | (30.8.10) Bosch Power Tools
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 61010-1,
EN 55022, EN 55024, EN 302435-1,
EN 302435-2 according to the provisions of the
directives 1999/5/EC, 2004/108/EC.
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 26.07.2010
Assembly
Inserting/Replacing the Battery
To open the battery lid 4, press the latch 5 in the
direction of the arrow and remove the battery
lid. Insert the batteries/rechargeable batteries.
When inserting, pay attention to the correct po-
larity according to the representation on the in-
side of the battery compartment.
The battery indicator b in the upper status line
on the display 16 indicates the charge condition
of the batteries/rechargeable batteries.
Note: Pay attention to the changing battery sym-
bol so that the batteries/rechargeable batteries
are replaced in time.
When the “Please
change batteries”
warning indication is
indicated on the dis-
play 16, the settings
are saved and the
measuring tool switch-
es off automatically. Measurements are no long-
er possible. Change the batteries/rechargeable
batteries.
To remove the batteries/rechargeable batteries,
press on the rear end of a battery as indicated
in the figure on the battery lid ( ). The front end
of the battery/rechargeable battery is released
from the battery compartment ( ), so that the
battery/rechargeable battery can easily be re-
moved.
Always replace all batteries/rechargeable bat-
teries at the same time. Do not use different
brands or types of batteries/rechargeable bat-
teries together.
f Remove the batteries/rechargeable batter-
ies from the measuring tool when not using
it for longer periods. When storing for longer
periods, the batteries/rechargeable batteries
can corrode and discharge themselves.
Operation
f Protect the measuring tool against mois-
ture and direct sun light.
f Do not subject the measuring tool to ex-
treme temperatures or variations in tem-
perature. In case of large variations in tem-
perature, allow the measuring tool to adjust
to the ambient temperature before switch-
ing it on. In case of extreme temperatures or
variations in temperature, the accuracy of
the measuring tool and the display indication
can be impaired.
f Do not attach any stickers or name-plates
to the sensor area 9 on the back of the
measuring tool. Especially metal name-
plates affect the measuring results.
f Use or operation of transmitting systems,
such as WLAN, UMTS, radar, transmitter
masts or microwaves, in the close proximity
can influence the measuring function.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Please change batteries
OBJ_BUCH-844-006.book Page 20 Monday, August 30, 2010 10:44 AM
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch D-tect 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch D-tect 150 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info