714384
21
Zoom out
Zoom in
Previous page
1/36
Next page
EN
21
Installation
www.bora.com
2
1
Fig. 6.27 Control box connections
[1] CAT 5 communication cable connection
[2] Cover flap connection cable
Connect the CAT 5 communication cable between the
control box connection [1] and the universal control
unit [1].
Connect the cable for the cover flap sensor to the
control box [2].
1
2
Fig. 6.28 Connection plug of the plinth fan
[1] Connection plug of the plinth fan control line
[2] Connection plug of the plinth fan power supply cable
Connect the plinth fan’s control line [1] to the
universal control unit [4].
Connect the plinth fan’s power supply cable [2] to the
universal control unit [6].
Release the power supply cable
To release the power supply cable [2] from the universal
control unit [6] you need a small flathead screwdriver.
Disconnect the universal control unit’s power supply
cable from the power supply [8].
Make sure that there is no power to the appliance.
Use the flathead screwdriver to loosen the lock on the
power supply cable’s plug.
To do this, insert the flathead screwdriver into the gap
in the socket.
Press the lock down gently.
Use the flathead screwdriver to gently lever the plug
of the power supply cable out of the universal control
unit’s socket.
Now disconnect the power supply cable from the
socket.
Check the plug and the socket for damage.
Do not use damaged components.
If simultaneously operating both a fireplace and the
cooktop extractor in the same room, ensure that:
the maximum low pressure is 4 Pa (4 x 10–5 bar);
a safety device (e.g. window contact switch, low
pressure warning device) is used to ensure that a
sufficient supply of fresh air is guaranteed;
the exhaust air is not be ducted into a chimney that
is used for exhaust gases of devices operated with
gas or other combustibles;
the installation is checked and approved by an
authorised certified engineer (e.g. heating engineer).
6.6 Establishing the power
connection and communication
Observe all safety and warning information
(see the Safety section).
Observe all national and regional laws and regulations
as well as the supplementary regulations of the local
utility companies.
The plug for the power supply must be accessible
following installation.
If the power supply cable has been damaged this must
be replaced.
Connecting the universal control unit and fan
to the cooktop extractor control box
86
4
2
1
75
3
Fig. 6.26 Connections on the universal control unit
[1] CAT 5 communication cable
[2] Home-Out
[3] Home-In
[4] Fan 1 control line
[5] Fan 2 control line
[6] Fan 1 power supply cable
[7] Fan 2 power supply cable
[8] Power supply cable with microfuse
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora PL540E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora PL540E in the language / languages: English as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora PL540E

Bora PL540E User Manual - German - 36 pages

Bora PL540E User Manual - Dutch - 36 pages

Bora PL540E User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info