714384
19
Zoom out
Zoom in
Previous page
1/36
Next page
EN
19
Installation
www.bora.com
Fig. 6.21 Sealing tape position for installation with a round duct
Depending on the required connection cross-section,
you can vary the height at which the sealing tape is
attached to the plinth fan inlet nozzle.
Secure the sealing tape on the outlet nozzle.
Fig. 6.22 Sealing tape position for installation with a transition
piece (shallow duct)
INFO When attaching the sealing tape, ensure that
an airtight seal with the connection duct piece
is created when the tape is compressed.
2
1
Fig. 6.20 Securing the cooktop extractor
[1] Tensioning screw
[2] Clamp
Turn the four clamps [2] under the worktop.
Tighten the clamp screws [1] with max. 10 Nm.
Verify that the alignment is correct.
Once all of the installation work is complete, seal the
devices with black, heat-resistant silicone sealant.
6.5.3 Preparing for installation –
standard set-up
INFO The floor unit must not be supported on the
plinth fan housing.
INFO For correct installation, the slide-in units of the
base cabinet must be shortened depending on
the installation situation.
Now adjust the ducting parts to the height of the
worktop.
Saw out the necessary cut-outs for the ducting in the
rear panel of the floor unit.
Depending on the installation situation, adjust the
levelling feet on the floor unit as necessary.
Prepare the plinth fan by attaching the sealing tape
depending on the installation situation.
Secure the sealing tape to the inlet nozzle.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora PL540E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora PL540E in the language / languages: English as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora PL540E

Bora PL540E User Manual - German - 36 pages

Bora PL540E User Manual - Dutch - 36 pages

Bora PL540E User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info