714526
19
Zoom out
Zoom in
Previous page
1/48
Next page
EN
19
Device description
www.bora.com
Heat retention level Power level Switch off after hours
1 2.0
2 2.0
3 2.0
1 6.0
2 6.0
3 5.0
4 5.0
5 4.0
6 1.5
7 1.5
8 1.5
9 1.5
P 0.2
Tab. 5.7 Overview of the safety shut-down
Switch the cooking zone back on (see Operating control)
if you want to put the cooking zone back into operation.
Cooktop extractor
The cooktop extractor switches off automatically if no
buttons are pressed for 120 minutes.
5.5.3 Overheating protection
The device is fitted with overheating protection.The
overheating protection can be triggered if:
Cookware is heated up empty.
Oil or fat is heated on high power.
A hot cooking zone is switched on again after a power cut.
There is insufficient ventilation below the cooktop (see
Cooktop air intake).
Before the overheating damages the electronics, one of
the following measures is taken:
The power level can no longer be increased.
The power level set is reduced.
The cooktop switches off completely.
After a sufficient cooling period, the cooktop can be used
again in full.
5.5.4 Automatic switch-off if the button is
pressed and held
The cooktop will be switched off automatically when
one or more sensor buttons are touched for longer than
10 seconds (finger contact, objects, soiling).
After a few seconds, the cooktop will switch off.
Remove the finger or object from the cooktop.
Clean the cooktop as required.
Where necessary, switch the cooktop back on.
5.5.5 Childproofing feature
The childproong feature prevents the cooktop from being
switched on accidentally. The childproong feature can
only be activated when the cooktop is switched on and all
cooking zones are switched o (see the Operation chapter).
5.4.3 Power setting
The cooktop extractor has a power-enhancing power
setting.
This power setting makes it possible to suction away high
levels of cooking vapours more quickly. After 10 minutes,
the power setting is automatically switched to power level
9
.
5.4.4 Automatic after-run
The cooktop extractor continues to run at a lower level
n
and switches off automatically after 20 minutes.
5.4.5 Filter service display
The filter service display becomes active after the cooktop
extractor has operated for 150 hours. The activated
charcoal filters have reached the end of their service life
(with recirculation only) and the stainless steel grease
filter needs to be thoroughly cleaned.
A flashing
F
is displayed in the filter service display.
The filter service display is shown every time the
cooktop extractor is switched on and remains active
until the filter has been changed and the filter service
display is reset.
The cooktop extractor can still be operated without
limitations.
5.4.6 Interface communication
The internal interface can be used for extended control
options. This has a Home-In and a Home-Out contact
(see Installation chapter).
The Home-In contact can be used for the incoming
signal from external switch devices (e.g. window
contact switch).
The Home-Out contact can be used to control
external installations.
5.5 Safety devices
5.5.1 Residual heat display
INFO While
H
is displayed in the cooking zone indicator
(residual heat display), do not touch the cooking
zone or place any heat-sensitive objects on top of
it. Risk of burns and fire!
After switching it off, the cooking zone remains hot.
H
is displayed in the cooking zone indicator (residual heat
display). The cooking zone indicator will go out after
sufficient cooling time (temperature < 60°C).
5.5.2 Safety shut-down
Cooking zone
Each cooking zone is switched off automatically when the
cooking zone exceeds the maximum operating duration at
a power level.
H
(residual heat display) is then displayed in
the cooking zone indicator.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BFIAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BFIAS in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BFIAS

Bora BFIAS User Manual - German - 52 pages

Bora BFIAS User Manual - Dutch - 52 pages

Bora BFIAS User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info