714526
18
Zoom out
Zoom in
Previous page
1/48
Next page
EN
18
Device description
www.bora.com
Perform a magnet test, if necessary. If a magnet sticks
to the base of the utensils, they are normally induction
compatible.
Pay attention to the cookware bottom. The base of
the cookware should not show any sign of curvature.
Due to incorrect temperature monitoring of the hob
caused by the air gap between the cookware and the
temperature sensor underneath the hob, overheating
may occur. The bottom of the cookware must not have
any sharp grooves or sharp edges to avoid scratching
the cooktop.
Place the cookware (without a mat or similar) directly
onto the glass ceramic.
Noises
The following noises may occur in the cookware when
using induction cooking zones, depending on the material
and the finish of the base:
Humming may occur when using a high power level. It
decreases or disappears if the power level is decreased.
Crackling or whistling may occur due to the bases of
cookware made of different materials (e.g. sandwich
base).
Clicking sounds may occur during electronic switching
procedures especially at low power levels.
Whirring may occur when the cooling fan is switched
on. In order to increase the service life of the
electronic system, the cooktop is equipped with a
cooling fan. The cooling fan switches on automatically
if the cooktop is used intensively. You will hear a
whirring sound. The cooling fan may continue running
after the device has been switched off.
5.4 Functional principle of the
cooktop extractor
5.4.1 Freely adjustable power control
The power levels are controlled using the central setting
field on the operating panel.
5.4.2 Automatic cooktop extractor function
The automatic cooktop extractor function adjusts the
extraction performance (power level) to the highest
cooking zone cooking level used.
Function Power levels
Extractor level 4 4 4 4 5 6 7 8 9 P
Cooking level 1 2 3 4 5 6 7 8 9 P
Tab. 5.6 Extraction performance and cooking level
If the power level of the cooking zones is changed,
the automatic cooktop extractor function adjusts the
cooktop extractor performance after a 30 second
delay.
Once the cooking session is complete, the automatic
after-run is activated.
5.3.5 Bridging function
The two side cooking zones can be operated as a
connected cooking zone at the same power level.
The display shows
%
.
The bridging function is suitable for heating food in a
roaster.
5.3.6 Pause function
The cooking session can be temporarily interrupted.
I I
appears in the display.
The cooking session and set timer are interrupted
while the pause function is active.
The pause function is limited to a maximum duration of
10 minutes.
5.3.7 Timer functions
You can use 2 timer functions:
Short-time timer (egg timer), no automatic switching
off of a cooking zone.
Automatic cut-off for automatically switching off a
cooking zone.
5.3.8 Pan size recognition
The cooking zone does not work
if
v
is shown in the display;
if it is switched on without cookware or with
unsuitable cookware;
if the base diameter of the cookware is too small;
if the cookware is removed from a switched on
cooking zone.
After 10 minutes have passed without a pan being
detected, the cooking zone will switch off automatically.
5.3.9 Suitable cookware
INFO The heating and heat through time for the base
of the cookware as well as the cooking results
are significantly influenced by the structure and
material of the cookware.
Cookware with this symbol is suitable for
induction cooktops.
The cookware used for the induction cooktop
must be made of metal, feature magnetic
properties and possess a sufficient bottom
surface.
Suitable cookware is made of:
stainless steel with a magnetisable base
enamelled steel
cast iron
Cooking zone Minimum diameter
Front 120 mm
Back 120 mm
Tab. 5.5 Minimum cookware diameter
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BFIAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BFIAS in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BFIAS

Bora BFIAS User Manual - German - 52 pages

Bora BFIAS User Manual - Dutch - 52 pages

Bora BFIAS User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info