714526
20
Zoom out
Zoom in
Previous page
1/48
Next page
EN
20
Installation
www.bora.com
6 Installation
Observe all safety and warning information (see the
Safety chapter).
Follow the enclosed manufacturer‘s information.
INFO The power supply cable must be provided by the
customer.
INFO The device must not be installed above cooling
devices, dishwashers, stoves, ovens, washing
machines or dryers.
INFO The contact surfaces of the worktops and wall
sealing strips must be made of a heat-resistant
material (up to approx. 100°C).
INFO Worktop cut-outs must be moisture-sealed using
suitable means and, where necessary, fitted with
a thermal insulator.
6.1 Checking the scope of delivery
Name Quantity
Surface induction glass ceramic cooktop with cooktop
extractor
1
Air inlet nozzle 1
Stainless steel grease filter 1
BAKF activated charcoal filter (BFIU only) 2
Flexible duct (BFIU only) 1
EURO screws (BFIU only) 6
BLAVH1 horizontal exhaust air extension (BFIA only) 1
Mounting straps 5
Sealing tape 1
Glass ceramic scraper 1
Cable routing clips 3
Protective hose 2
Cable tie 2
Operating and installation instructions 1
Lenshead screw 5
Drilling template (BFIU only) 1
Height adjustment plate set 2
Tab. 6.1 Scope of delivery
Check the scope of delivery for damage and make sure
it is complete.
If there are any missing or damaged parts, please
notify BORA After Sales Service immediately.
Do not under any circumstances install parts which are
damaged.
Dispose of transport packaging in the proper manner (see
the Decommissioning, Disassembly and Disposal chapter).
6.2 Tool and aids
The following tools are required for the correct installation
of the cooktop:
Pencil
Standard or cordless drill with a 5 mm wood drill
(for the rear wall)
Compass saw or hand saw
Drilling template for cut-out on rear wall
(included in scope of delivery)
Phillips screwdriver Z2
Silicone sealant for sealing cutting surfaces
6.3 Assembly instructions
6.3.1 Safety distances
Maintain the following safety distances:
1
3
2
Fig. 6.1 Recommended minimum clearances
[1] Rear minimum clearance of 50 mm between the worktop
cut-out and the rear corner of the worktop.
[2] Minimum clearance of 300 mm from the left and right of the
worktop cut-out to the adjacent cabinet or wall.
[3] Minimum clearance of 600 mm between the worktop
and the wall unit. A minimum clearance of 1000 mm is
recommended for ergonomic reasons.
6.3.2 Worktop and kitchen units
Create the worktop cut-out taking into account the
specified cut-out dimensions.
Make sure that the cut surfaces of the worktops are
properly sealed.
Comply with the instructions of the worktop
manufacturer.
Cross bars on the kitchen unit in the area of the
worktop cut-out may need to be removed.
No false floor is necessary below the cooktop. If cable
protection (false floor) is planned, the following must
be taken into account:
It must be fitted in such a way that it can be
removed for maintenance work.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BFIAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BFIAS in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BFIAS

Bora BFIAS User Manual - German - 52 pages

Bora BFIAS User Manual - Dutch - 52 pages

Bora BFIAS User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info