Manual Bomann NM 6063 CB (page 15 of 74) (English, German, Dutch, French, Italian, Polish, Spanish)

814761

Zoom out

Zoom in

1/74

NM6063CB_IM 19.04.23

6. At the end of the seam, the needle must be in the upper

position to allow the thread to be pulled out easily.

7. Lift the presser foot to remove the fabric.

8. To cut the threads, you can pass them over the thread

cutter (12). Or use a pair of scissors.

Buttonholes

1. Place the fabric under the presser

foot (20).

2. Lower the presser foot where you

want to sew the buttonhole.

3. Then select stitch pattern 8 with the

adjusting wheel (3).

4. Sew 5 – 6 stitches with low speed

(L).

5. Select stitch pattern 7 with the

adjusting wheel (3).

6. Sew on the fabric at a suitable

length. Make sure the stitch is

sewn in a straight line.

7. Select stitch pattern 8 with the

adjusting wheel (3).

8. Sew 5 – 6 stitches with low speed

(L).

9. Lift the presser foot (20) and turn

the fabric 180 °.

10. Select stitch pattern 7 with the

adjusting wheel (3).

11. Sew until the buttonhole is com-

pletely sewn.

End Operation

1. Switch off the appliance by sliding the switch (8) to the

OFF position.

2. Switch off the light with the switch (11).

3. Unplug the power supply unit (26) from the socket.

4. Disconnect the foot pedal (25) and power supply unit

(26) from the sewing machine.

Cleaning

WARNING:

• Switch off the appliance before cleaning. Unplug the

power supply unit from the socket.

• Never immerse the sewing machine, the foot pedal

or the power supply unit in water for cleaning! It could

cause an electric shock or re.

CAUTION:

• Do not use a wire brush or other abrasive objects.

• Do not use any sharp or abrasive cleaning agents.

• Use only a moderately damp cloth to clean the outside of

the housing. If necessary, use a little hand dishwashing

detergent. Then dry the housing with a soft cloth.

• Clean the area underneath the bobbin cover with a dry

brush.

Storage

• We recommend storing the appliance in its original

packaging if you do not intend to use it for a long period

of time.

• Always store the appliance out of the reach of children in

a well-ventilated and dry place.

Troubleshooting

Problem Possible Cause Remedy

The upper-thread

breaks.

The upper-thread is not threaded correctly

in the sewing machine.

Re-thread the upper-thread.

The thread tension is too tight. Loosen the thread tension (lower number).

The thread is too thick for the needle. Select a larger needle.

The needle is not inserted correctly. Remove the needle and reinsert it. (Flat side of the

needle points to the back.)

The needle is damaged. Replace the needle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann NM 6063 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann NM 6063 CB Manual

Product: