814761
16
Zoom out
Zoom in
Previous page
1/74
Next page
NM6063CB_IM 19.04.23
16
Problem Possible Cause Remedy
The under-thread
breaks.
The under-thread bobbin is not inserted
correctly.
Check the position of the under-thread bobbin.
The upper-thread tension is too loose. Adjust the upper-thread tension (higher number).
Stitches are skipped. The needle is not inserted correctly. Remove the needle and reinsert it. (Flat side of the
needle points to the back).
The needle is damaged. Insert a new needle.
The wrong needle size has been used. Choose a needle that is suitable for the thread and
fabric.
The presser foot is not attached correctly. Check the position of the presser foot and insert it
correctly.
The needle breaks. The needle was damaged. Insert a new needle.
The needle is not inserted correctly. Remove the needle and reinsert it. (Flat side of the
needle points to the back).
Wrong needle size for the fabric. Choose a needle that is suitable for the thread and
fabric.
The presser foot is not attached correctly. Check the position of the presser foot and insert it
correctly.
Loose stitches The upper-thread is not threaded correctly
in the sewing machine.
Check the threading of the upper-thread.
The under-thread bobbin is not inserted
correctly.
Insert the under-thread bobbin correctly.
Needle / fabric / thread combination is
wrong.
The needle size must be suitable for fabric and
thread (see table on page 13).
Wrong thread tension. Correct the thread tension.
Seam curls The needle is too big for the fabric. Select a ner needle.
The stitch length is set incorrectly. Select a suitable stitch pattern with the stitch pattern
adjustment wheel.
The thread tension is too tight. Loosen the thread tension (lower number).
Technical Data
Model:.................................................................NM 6063 CB
Protection class: ..................................................................
Power supply:...............................................DC 6 V, 1200 mA
Sewing eld light: ............................................LED 0.1 W, 3 V
Net weight: ....................................................... approx. 2.1 kg
Power Supply Unit
Protection class: ...................................................................
Input: ........................... AC 100 240 V, 50 / 60 Hz, max. 0.4 A
Output:..........................................................DC 6 V, 1200 mA
Polarity: ......................................................................
Battery operation: ............................. 4 × 1.5 V type AA / LR6
The right to make technical and design modications in the
course of continuous product development remains reserved.
This appliance has been tested according to all applicable,
current CE directives and built according to the latest safety
regulations.
Product Specications in Accordance with
Regulation (EU) 2019 / 1782 Power Supplies
Information about the
Power Supply Used Value Unit
Distributor
C. Bomann GmbH
Commercial register number HRB 9845
Heinrich-Horten-Straße 17, 47906 Kempen
Germany
Model identier SW0601200-W02
Input voltage 100 – 240 V~
Input alternating current
frequency 50 / 60 Hz
Output voltage AC / DC 6.0 V DC
Output current 1.2 A
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann NM 6063 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann NM 6063 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info