379754
19
Zoom out
Zoom in
Previous page
1/44
Next page
ENGLISH
19
Parts and Drawings
A Cover, removable G Baking compartment
B Handle H Control Panel
C Viewing panel I Casing
D Vent J Side vent
E Baking tin K Cable
F Kneading pegs L On/off Switch
Accessories (not shown):
1 hook to remove the kneading pegs,
1 measuring spoon, 1 measuring beaker
Control Panel
1 LED display
It shows the time left before the end of the program
2
START-/STOPP key
To start and stop the program
3
FARBE key
To set the desired level of browning
4
TEIGMENGE key
To set 2 weight levels as described below
5
AUSWAHL key
To select the programs described in the “program
phase timing” section.
6
/ ZEIT keys
To set the preprogram timer
Description of the Control Panel
Insert the plug into a properly installed 230V/50Hz
protective contact socket and switch on the appli-
ance with the on/off switch (L).
1. DISPLAY
BASIC SETTING
This displays signals when the appliance is ready for
use. It corresponds to the normal program. “1 3:30”
ap pears on the display.
The “1” specifi es which program has been chosen
and the “3:30” is the length of the program.
The positions of two arrows provide information on
the selected browning level and the weight.
The basic setting after switching the appliance on is:
“superior weight” and “medium browning level”.
During operation the course of the program can be
read on the display. As the program proceeds the
digits of the set time will decrease progressively.
2.
START/STOPP key
To start and stop the program.
As soon as the
START/STOPP key is pressed,
the points of the time value start to blink. Use the
START/STOPP key to stop the program in any
moment. Keep the key pressed until a signal beep
is heard. The starting position of the aforementioned
start program appears on the screen. If a different
needs to be used, select it with the
AUSWAHL
key.
3.
/ ZEIT keys
Those programs that can be timed to start later on
are listed in the “Program Phase Timing” table. The
SCHNELL, KUCHEN, SÜSSES BROT and MARME-
LADE programs cannot be timed to start later on.
The hours and minutes after which the preparation
should be started need to be added to the relevant
basic time for the specifi c program plus 1 hour of
warming time (after the end of the baking process).
A maximum timing of 13 hours can be set.
Example:
It is 8.30 p.m. and the bread must be ready the
next morning by 7.00 a.m., i.e. in 10 hours and 30
minutes.
Press the
/ ZEIT key until 10.30 appears, that
is to say the time between now (8.30 p.m.) and when
the bread must be ready.
When working with the timing function never use pe-
rishable ingredients such as milk, eggs, fruit, yogurt,
onions, etc.!
4.
FARBE key
The desired browning level is set with this key:
HELL - MITTEL - DUNKEL
(LIGHT – MEDIUM – DARK).
5.
TEIGMENGE key
It provides for the following settings in the various
programs (see table):
STUFE I = For small quantities of bread;
STUFE II = For large quantities of bread.
In the recipes you will fi nd our recommended quan-
tities.
6.
AUSWAHL key
Use this menu key to run one of the available
programs described in detail in the “Program Phase
Timing” table. Use the programs for the following
specialties:
1. NORMAL (NORMAL) For white and wheat
and rye bread. This program is
used the most.
2. SCHNELL (RAPID) For the quick prepara-
tion of white and wheat and rye
bread
3. WEISSBROT (WHITE BREAD) For the prepa-
ration of particularly light white
bread
4. SÜSSES BROT (SWEETBREAD) For the prepa-
ration of sweet leavened dough
5. VOLLKORN (WHOLEMEAL)
For wholemeal bread
6. KUCHEN (CAKE)
For cakes with baking powder
7. TEIG (DOUGH)
For the preparation of dough
8. BACKEN (BAKING)
To brown bread or cakes
9. MARMELADE (MARMALADE)
To cook marmalades and jams
10. SANDWICH (SANDWICH) To prepare light
sandwich bread
05-CB 594 D_GB_H Neu.indd 1905-CB 594 D_GB_H Neu.indd 19 10.01.2008 14:29:05 Uhr10.01.2008 14:29:05 Uhr
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann cb 594 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann cb 594 in the language / languages: English, German as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info