528712

BH Fitness H872N Monitor Manual V1 Manual

11
Zoom out
Zoom in
Previous page
1/76
Next page
11
can program the heart rate for the
exercise (between 30-240 bpm).
Select the heart rate and press
START / STOP to begin the exercise.
If the heart rate is equal to or higher
than the target value, the monitor will
beep several times to warn the user to
pedal more slowly or reduce the
exertion level.
PROGRAM FUNCTION
After selecting the user the LEDs for
the various programs will start flashing
on the right hand side of the monitor.
MANUAL, PROGRAM, USER, H.R.C
and WATT. Press the ▲/▼ keys to
select the PROGRAM function and
press ENTER/MODE. Press the ▲/▼
keys to select the program graph (1-
12) that you wish to use and then
press the ENTER key. Press START /
STOP to start the exercise. By default
the jump to the next column occurs
every 0.1 km travelled.
To program time, distance, calories
and/or pulse rate, go through the
following procedure: Once the
program has been selected and
before pressing the START / STOP
key, press the ENTER/MODE key to
program the time using the ▲/▼ keys.
In this case the time will be divided
into sixteen stages. Press the ENTER
key to program the distance. Press
ENTER again to program the calories.
Press the ENTER key one last time to
program the pulse rate. Press START
/ STOP to start the exercise.
You can vary the exertion level during
the exercise by pressing the ▲/▼
keys.
USER PROGRAM
After selecting the user the LEDs for
the various programs will start flashing
on the right hand side of the monitor.
MANUAL, PROGRAM, USER, H.R.C
and WATT. Press the ▲/▼ keys to
select the USER function and press
ENTER/MODE. The first column of the
exercise level will start flashing to the
left of the central area of the display.
Select the desired level for this first
stage using the ▲/▼ keys and then
press ENTER/MODE. Repeat this
procedure to program all sixteen
stages of the user program. Press and
hold the ENTER/MODE key down to
exit the profile set up. Press START /
STOP to start the exercise.
To program time, distance, calories
and/or pulse rate, go through the
following procedure: Once you have
defined the user program: Press the
▲/▼ keys to select the time. Press
the ENTER/MODE key to program the
distance. Press ENTER/MODE again
to program the calories. Press the
ENTER/MODE key one last time to
program the pulse rate. Press START
/ STOP to start the exercise.
HEART RATE CONTROL
PROGRAMS
After selecting the user the LEDs for
the various programs will start flashing
on the right hand side of the monitor.
MANUAL, PROGRAM, USER, H.R.C
and WATT. Press the ▲/▼ keys to
select the H.R.C function and press
ENTER/MODE.
Next the Male ♂ / Female ♀ symbols
will appear, Select using the ▼▲ keys
and press ENTER/MODE to confirm.
Then Age will appear, select using the
▼▲ keys (between 1 to 99) and press
ENTER/MODE to confirm. It will now
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness H872N Monitor Manual V1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness H872N Monitor Manual V1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info