528712
9
Zoom out
Zoom in
Previous page
1/76
Next page
9
English
ELECTRONIC MONITOR
When the machine is switched on the
monitor will display U1 in the centre of
the screen. Select the user, between
U1-U4, using the /keys and then
press the ENTER/MODE key.
To give you greater control over the
exercise, this electronic monitor
provides simultaneous read-outs of
speed/rpm, distance, exercise time,
calories burnt and pulse rate.
STARTING
The monitor will switch on
automatically and begin at 45 rpm (on
this model equivalent to approximately
6 km/h on the monitor) and switch off
if this speed is not reached or if
cancelled.
Optionally, if you wish to have the
monitor on constantly you can plug the
adapter (9V), supplied with the
machine, into the mains socket (220 V
240 V) and the jack on the adapter
into the socket at the bottom rear of
the machine.
The screen will switch on
automatically when you begin
exercising on program “U1" (User 1).
Select the user, between U1-U4, using
the /keys and then press the
ENTER/MODE key, after which the
programs available on the monitor will
appear.
If at any time during exercise you
press the START/STOP button then
all of the unit’s functions will stop.
Pressing the START/STOP button
again will restart the machine.
When working without an adapter, the
monitor switches off automatically as
soon as you stop exercising. When
working with the adapter, the monitor
will switch off after the machine has
been idle for 4 minutes.
Important: Deposit electronic
components in special containers, Fig.
1.
MONITOR FUNCTIONS
This electronic unit has seven function
keys: RECOVERY, FAN ON/OFF,
START / STOP; RESET,
ENTER/MODE; ; . PULSE / THR
is display at the top of the monitor.
The centre of the screen will
simultaneously display the selected
program level. There are three
windows at the bottom of the display
that indicate the SPEED / RPM; TIME;
DISTANCE; WATTS / CALORIES.
This monitor also has 1 manual
program, 12 pre-set exertion level
programs; 1 user defined program; 4
Heart Rate Control programs and 1
steady watt rate program.
With the monitor either stopped or
working the SPEED / RPM and TIME /
CALORIES and DISTANCE / WATT
windows give alternate displays every
5 seconds.
STARTING THE FAN
To switch the fan on or off, press the
FAN ON/OFF key.
Whenever you finish your exercise,
make sure that the fan is switched off.
By pressing the RESET key the
monitor will enter program selection
status. Holding the RESET key down
for 4 seconds will reset the monitor
allowing you to select a new user by
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness H872N Monitor Manual V1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness H872N Monitor Manual V1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info