528753
11
Zoom out
Zoom in
Previous page
1/49
Next page
11
PROGRAM FUNCTION
After entering your personal data the
LEDs for the various programs will
start flashing the monitor: BODYFAT
MANUAL, PROGRAM, USER, H.RC
and RACE. Press the / keys to
select the PROGRAM function and
press ENTER. Press the / keys to
select the program graph (1-12) that
you wish to use and then press the
ENTER key. Press the / keys to
select the level.
Press START / STOP to start the
exercise. By default the jump to the
next column occurs every 0.1 km
travelled.
To program time, distance, calories
and/or pulse rate, go through the
following procedure: Once the
program has been selected and
before pressing the START / STOP
key, press the ENTER key to program
the time using the / keys.
In this case the time will be divided
into sixteen stages. Press the ENTER
key to program the distance. Press
ENTER again to program the calories.
Press the ENTER key one last time to
program the pulse rate. Press START
/ STOP to start the exercise.
You can vary the exertion level during
the exercise by pressing the / keys.
USER PROGRAM
After entering your personal data the
LEDs for the various programs will
start flashing the monitor: MANUAL,
BODYFAT, PROGRAM, USER, HRC
and RACE. Press the / keys to
select the USER function and press
ENTER.
The first column of the exercise level
will start flashing to the left of the
central area of the display. Select the
desired level for this first stage using
the / keys and then press ENTER.
Repeat this procedure to program all
sixteen stages of the user program.
Press and hold the ENTER key down
to exit the profile set up. Press START
/ STOP to start the exercise.
To program time, distance, calories
and/or pulse rate, go through the
following procedure: Once you have
defined the user program: Press the
/ keys to select the time. Press
the ENTER key to program the
distance. Press ENTER again to
program the calories. Press the
ENTER key one last time to program
the pulse rate. Press START / STOP
to start the exercise.
HEART RATE CONTROL
PROGRAMS
After entering your personal data the
LEDs for the various programs will
start flashing the monitor: MANUAL,
BODYFAT, PROGRAM, USER, HRC
and RACE. Press the / keys to
select the HRC function and press
ENTER.
Then Age will appear, select using the
▼▲ keys (between 10 to 99) and
press ENTER to confirm.
Select the target heart rate for the
exercise. Use the / keys to select
the desired option (55%, 75% 90% or
THR) and press the ENTER key. The
first three represent the percentage
with respect to maximum heart rate
(220-age) and the fourth is used to
specify the target heart rate manually.
In the first three cases, the lower
window on the display (TARGET H.R)
will show you the calculated value for
your maximum heart rate level. If you
choose THR then you should use the
/ keys to select the desired heart
rate and then press ENTER.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G2370 Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G2370 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info