528753
12
Zoom out
Zoom in
Previous page
1/49
Next page
12
Press START / STOP to start the
exercise.
Your hands must be placed on the
pulse sensors (R) when using these
programs.
Three symbols will help you with your
training sessions:
Within the work margin, this
indicates that the speed is too high
and you should slow down.
Within the work margin, this
indicates that the speed is too low and
you should speed up.
------- This indicates that the value is
outside the work limit (either too high or
too low) so you should speed up or
slow down accordingly. The monitor
will beep several times to indicate this
status. If the situation continues for
more than three minutes, the monitor
will give six beeps and then switch itself
off, resetting the watt value back to
zero.
RACE PROGRAM
After entering your personal data the
LEDs for the various programs will
start flashing the monitor. BODYFAT,
MANUAL, PROGRAM, USER, HRC
and RACE. Press the / keys to
select the RACE function and press
ENTER.
In this mode, the user can compete
against the exercise monitor.
By pressing / , you can set speed
(5-40 km / h) and distance (0.5-99.5
km). Press ENTER to confirm.
You start a competition against the
machine. At the bottom will show the
progress of the user and at the top the
benchmark. The first to reach the
finish line wins.
Two symbols will help you with your
training sessions:
Within the work margin, this
indicates that the speed is too high.
Within the work margin, this
indicates that the speed is too low.
BODY FAT PROGRAM.-
This program is designed to calculate
the user’s body fat percentage and
then create specific load profiles.
After entering your personal data the
LEDs for the various programs will
start flashing the monitor. BODYFAT,
MANUAL, PROGRAM, USER, HRC
and RACE.
Press the / keys to select the
BODYFAT function and press ENTER.
Press the START/STOP key and
place your hands on the pulse
sensors (R) (Hand-grips), as shown
in Fig 3, and after a few seconds the
lower screens on the display will
show your FAT%; BMI (Body Mass
Index) and BODY TYPE.
The main screen will display the type
of profile for your body type.
If the error code E-1” appears then
this means that an error has
occurred, position your hands
correctly on the pulse sensors (R),
Fig 3.
"E-2" means that data is out of range.
Press BODYFAT again to exit this
function.
REFERENCE TABLE: BODY FAT
PERCENTAGE %
SEX /
FAT%
LOW LOW /
AVERAGE
AVERAGE
HIGH
MALE <
13%
13%-
25,8%
26%-30% >30%
FEMALE <23%
23%-
35,8%
36%-40% >40%
REFERENCE TABLE: BMI
THIN= NORMAL+ SLIGHTLY
OVERWEIGHT
OVER
WEIGHT
<18,5 =18,5~24,9 =25~30 <30
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G2370 Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G2370 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info