528753
10
Zoom out
Zoom in
Previous page
1/49
Next page
10
CHANGING FROM ONE
WORK MODE TO ANOTHER
This monitor allows you to work in 6
different modes: BODYFAT, Manual,
Program, User, Pulse (TARGET HR)
and RACE. In order to pass from one
mode to another press the
START/STOP button to stop the
monitor, then press RESET and, with
the help of the / buttons and
ENTER key, select the desired mode.
You can also use hotkeys BODY-FAT;
MANUAL: PROGRAM; RACE;
PERSONAL; HRC.
MANUAL FUNCTION
After entering your personal data the
LEDs for the various programs will start
flashing the monitor USER, MANUAL,
BODYFAT, PROGRAM, HRC and
RACE.
Press the / keys to select the
MANUAL function and press ENTER-
Press the START / STOP key to start
exercising. If you press the START /
STOP key while at the start screen,
exercise will begin directly in manual
mode.
Programming a calorie limit.-
If, after selecting manual mode, you
press the ENTER key the calorie
window will start flashing. By pressing
the / keys you can program the
calories for the exercise (between 10-
990 Cal.). Select the calories and
press START / STOP to begin the
exercise. The calories will begin to
count down until they reach zero and
the monitor will beep several times to
advise you that you have reached the
programmed value.
Programming a time limit.-
If, after selecting manual mode, you
press the ENTER key twice, the time
window will start flashing. By pressing
the / keys you can program a time
limit for the exercise (between 1-99
minutes). Select the time and press
START / STOP to begin the exercise.
The time will begin to count down until
it reaches zero and the monitor will
beep several times to advise you that
you have reached the programmed
value.
Programming a distance limit.-
If, after selecting manual mode, you
press the ENTER key three times the
distance window will start flashing. By
pressing the / keys you can
program a distance for your exercise
(between 0.5 – 99.5 km). Select the
distance and press START / STOP to
begin the exercise. The distance will
begin to count down until it reaches
zero and the monitor will beep several
times to advise you that you have
reached the programmed value.
Programming the HEART RATE.-
If, after selecting manual mode, you
press the ENTER key four times the
PULSE window will start flashing. By
using the / keys you can program
the heart rate for the exercise
(between 30-240 bpm). Select the
heart rate and press START / STOP
to begin the exercise. If the heart rate
is equal to or higher than the target
value, the monitor will beep several
times to warn the user to pedal more
slowly or reduce the exertion level.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G2370 Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G2370 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info