585414
10
Zoom out
Zoom in
Previous page
1/28
Next page
10
This log-cutting saw model „Spessart Woody 602/603/701“ is specifi-
cally recommended for stationary use in your yard.
A rugged all-steel construction assures longest machine life at nearly
any operative condition.
This machine is specially designed to work with a 600 and 700 mm
blade approved and manufactured to EN 847-1 respectively for the
603/602 and 701 version.
Both versions are powered by inbuilt electric motor with inbuilt elec
-
tronic braking system.
Plug your machine to an EC-approved 16 Amp power socket.
An electrical power cord for providing low-voltage alternating current
outputs from a high-voltage alternating current source is required for
230V saw versions. The cord section must be of at least 2.5 mm (cord
standard coding: 3x2,5) and it should not exceed a max length of 10
metres. A switch-plug combination outlet provides power supply to
the machine.
Have a skilled electrician connect and branch the machine for therst time.
When you switch the machine on, make sure to check that the blade
is mounted to rotate in the proper direction before cutting any materi
-
al. The tool must rotate against the operator that is upward toward
operator. If not, immediately switch the polarity in the plug of main
power cord using a phase changer. If you don’t feel familiar with pha
-
se changing ask a licensed electrician to reset the saw cord.
Load the log in the carriage and smoothly push to the blade.
If you working with twisted or crooked logs make sure to load
the log on the carriage, so that the bulged side of the log is
turned to the blade in order to avoid the log from tipping over
or jamming during cutting and consequent possible, even ma-
jor damages to the blade.
Now fasten the grip on the log carriage and push to smoothly tilt it
over towards and through the blade.
NOTE: avoid excessive pressure on the carriage through the blade
while cutting. Excessive hold-down pressure may slow the blade down
and cause dangerous jamming!
Now fasten the grip on the log trough and push to smoothly tilt it over
towards and through the blade. When doing so avoid all jerky, bumpy
movements that could lead to risky and dangerous situations. Timber
in maximum length of 1.1 m must lay on the carriage by the entire
5. OPERATING INSTRUCTIONS
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BGU 701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BGU 701 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info