585414
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
Operators must wear steel toe safety shoes and snug-fitting, tear-
resistant work cloths.
No additional customised protections or tools are provided on board of the
machine, other than the ones designed and supplied by the manufacturer.
Do not apply pressure (for instance by means of the wood stock)
against the blade to make it come to a quicker stop.
The machine is not designed for indoor use (dust release).
NEVER leave the machine unattended with the running motor.
Before leaving the operator‘s station for any reason, stop the machine mo
-
tor, disconnect power and secure the machine against accidental operation.
4.1 Safety rules about saw blade
The unit is strictly designed for use with 600 or 700 mm (outer dia-
meter) blades.
The blade (Cr) is capable to withstand a maximum number of revolu
-
tions of 3000 rev. per minute.
Strictly use blades as per EN Standard 847-1.
Do not ever use worn out blades in need of sharpening.
Make sure that the blade shows good conditions, no damages, no
cracks, no buckling and no missing/broken teeth/bits.
Hard metal blades require special care and handling. Make sure that
the blade bits do not ever hit against hard surfaces (for example con
-
crete floors), which might cause invisible bits damage. Hard metal
blades must be suitable to operate at a maximum speed of 2700 re
-
volutions per minute.
4.2 Mandatory application field
These log-cutting saws are strictly designed for cutting firewood
chunks loaded on the special log carriage. All other applications are
forbidden and considered as “misuse”.
The manufacturer is not liable for any damage or injury resulting from
misuse! The machine is available in two versions SPESSART 602(603)
and SPESSART 701 respectively capable to handle wood stocks in di
-
ameter of 8 up to approximately 19.5 cm (24 cm). The larger 701
model is capable to handle logs up to a max diameter of 27cm in two
cuts (turn the log around after first cut). Shrubs and tiny branches
bundles must be loaded on the carriage and securely hold on both si-
des of the blade.
The machine is strictly conceived for ONE-MAN OPERATION ONLY.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BGU 701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BGU 701 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info