585414
8
Zoom out
Zoom in
Previous page
1/28
Next page
8
Strictly perform installation, set-up, maintenance, cleaning
and transportation with the motor switched off and the blade
firmly secured against accidental operation. Immediately dis
-
connect power off the machine in case of any eventual fault or
trouble.
The user shall strictly comply with these operation, set-up, mainte-
nance, repair and trouble-shooting instructions in order to assure safe
operation and no damages to the equipment. Moreover, we recom-
mend to let the machine be run only and strictly by trained and skilled
staff who must be familiar with the applicable occupational safety and
health administration rules as well as applicable transportation and traf
-
fic rules. Incorrect use of the saw can cause serious injury or death.
No person under school leaving age of 18 should operate a circular
saw. However, young people in age of 16 or slightly more may work
on the machine providing that they received adequate training, that
they carry all due personal protection safeties and that an adult su-
pervisor keeps standing nearby. Machine instability can result in injury
or severe damages. To ensure stability during operation make sure to
choose a flat, dry floor free from any tall grass, brush or other inter
-
ferences.
The working area around the machine must be kept as clear as pos
-
sible from surrounding tripping obstacles and slippery foundation
floors should be duly treated (do not use saw dust or wood ash for
this purpose).
Make sure that the equipment stands on a safe stable foundation.
Do not allow within the hazardous zone any unauthorized third or per
-
sons who are not familiar with the dangers related to use and opera
-
tion of the machine. Allow no bystanders, especially children and pets
in the working area.
Due and proper illumination of the working site must be provided at all times.
The saw blade must be duly sharpened for maximum performance and
no recoil danger. Flash and chips must be removed off the crown wheel.
Damaged or buckled blades (very likely to break during operation)
should not be used.
Always have the electrical system of your saw be inspected and ser
-
viced strictly and only by licensed electricians.
Always wear suitable hearing (ear plugs or muffs) and eye protec
-
tion (goggles or safety glasses) while operating the machine.
Set up the machine on a firm surface which is free from stumps,
boulders and other obstructions.
4. SAFETY
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BGU 701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BGU 701 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info