710519

Beper BC001 Manual

13
Zoom out
Zoom in
Previous page
1/44
Next page
13
Espresso machine Use instructions
EN
3 - Fill a jug with about 150 grams of milk for each cappuccino to be prepared, you are recommen-
ded to use whole milk at refrigerator temperature (not hot!).
Note: In choosing the size of jug, it is recommend the diameter is not less than 70±5mm, and bear in
mind that the milk increases in volume by 2 times, make sure the height of jug is enough.
4 - Insert the steam wand(with the frothing device) into the milk about two centimetre, then turn the
knob to the “ ” position , steam will come out from the steam wand. Froth milk in the way moving
vessel round from up to down.
5. When the required purpose is reached, you can turn the knob to the “ ” position.
Note: Clean steam outlet with wet sponge immediately after steam stops generating, but care not
to hurt!
6. Pour the frothed milk into the espresso prepared, now the cappuccino is ready. Sweeten to taste
and if desired, sprinkle the froth with a little cocoa powder.
7. Press the power switch to cut off the power source.
Note:Before making coffee again.You should turn the knob to the “ ” position and press the
steam button to the higher position which is the “ ” position, the pump will pump water until the
ready indicator is went out then turn the knob to the“ ” position and wait until the indicator lights
up blue again.
Producing steam to heat liquids
The steam wand (without the frothing device) can be used to make hot beverages like drinking
chocolate, and water.
Method:
1. Remove the detachable tank and ll it with desired water, the water level should not exceed the
“MAX” mark in the tank. Then place the tank into the appliance properly.
2. Then connecting the appliance to power supply source.
3. Press the ON/OFF switch, the power indicator (red) is illuminated.
4.Turn the knob to the “ ” position, make sure the steam button is on the higher position which is
the“ ”position, the pump will pump water, when there is water owing out, close the pump imme-
diately, pressing down the steam button to the lower position which is the “ ” position and waiting
for a moment, the appliance begins to be heated until the yellow lamp is illuminated, it shows the
heating is nish.
5. Remove the frothing device from the steam wand.
6. Dip the steam wand into the liquid to be heated. Turn the knob to the “ ” position.
7. When the required temperature is reached, you can turn the knob to the“ ” position.
8. Press the power switch to cut off the power source.
Automatically power-off function
1. After pressing power switch, if there is no any operation within 25 minutes, the unit will power off
automatically.
2. After pressing power switch, if there is no any operation after pump worked for 3 minutes during
brewing coffee, the unit will power off automatically.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BC001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BC001 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info