710519

Beper BC001 Manual

12
Zoom out
Zoom in
Previous page
1/44
Next page
12
Espresso machine Use instructions
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in the
appliance, then insert the funnel into the appliance as indicating of “INSERT” mark, and you can x
them into coffee maker rmly through turn it anticlockwise until it is fully locked.
3. Place an espresso cup (yourself cup) on removable drip plate.
4. Then connecting the appliance to power supply source. Make sure the knob is on the “ ” posi-
tion.
5. Press the ON/OFF switch, the power indicator (red) will be illuminated, make sure the steam but-
ton is on the higher position which is the “ ” position. Turn the knob to the “ ” position, when
there is water owing out, close the pump immediately by turning knob again to the “ ” position.
The purpose of the step is that pump the water of the tank into the housing.
6. When the ready indicator (blue) is illuminated, you should turn the knob to the “ ” position again,
there will be hot water owing out. When the ready indicator (blue) is extinguished, close the pump
by turning knob again to the “ ” position. The pre-heating is nished.
Make espresso coffee
1. Remove the funnel by turning it in clockwise, .Add ground coffee to steel mesh with coffee spoon,
a spoon ground coffee power can make about a cup of top-grade coffee, then press the ground
coffee powder tightly with the coffee spoon.
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in the ap-
pliance, then insert the funnel into the appliance as indicating of “INSERT” mark, and you can x
them into coffee maker rmly through turning it anticlockwise until it is at the “LOCK” position .
3. Pour out the hot water in the cup. Then place the hot cup (yourself cup) on drip plate.
4. At the time, the ready indicator (blue) is illuminated, once the blue lamp is illuminated, you should
turn the knob to the “ ” position, waiting for a moment, there will be coffee owing out.
Note: During continuous operations, the ready indicator is likely to extinguish due to the inadequate
temperature of the water in the boiler, but it does not mean the unit will stop operating, you may
continue to make coffee regardless of it.
5.You should turn the knob to the “ ” position manually when desired coffee is obtained or the
colour of coffee changes weak obviously,your coffee is ready now.
WARNING: Do not leave the coffee maker unattended during making the coffee, as you need ope-
rate manually sometimes!
6. After nishing making the coffee, you can take the metal funnel out through turn clockwise, then
pour the coffee residue out with the steel mesh pressed by press bar.
7. Press the power switch to cut off the power source.
8. Let them cool down completely, then rinse under running water.
Frothing milk / make cappuccino
You get a cup of cappuccino when you toping up a cup of espresso with frothing milk.
Method:
1- Prepare espresso rst with container big enough according to the part “MAKE ESPRESSO COF-
FEE”, make sure that the knob is at the “ ” position.
2- Press down the steam button to the lower position which is the “ ” position, waiting for until the
ready indicator (yellow) is illuminated.
Note: During continuous operations, the ready indicator is likely to extinguish due to the inadequate
temperature of the water in the boiler, but it does not mean the unit will stop operating, you may
continue to make cappuccino regardless of it.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BC001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BC001 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info