Manual Beper BC001 (page 11 of 44) (English, German, French, Italian, Spanish)

710519

Zoom out

Zoom in

1/44

Espresso machine Use instructions

COMPONENTS

1. Water tank cover

2. Water tank handle

3. Water tank

4. Power indicator

5. Ready indicator

6. Knob

7. Steam wand

8. Froth device

9. ON/OFF switch

10. Coffee spoon

11. Drip tray

12. Drip plate

13. Funnel handle

14. Steel mesh

15. Steam button

Before the rst use

To ensure the rst cup of coffee tastes excellent, you should rinse the coffee maker with warm water

as follows:

1. Pour water into water tank, the water level should not exceed the “MAX” mark in the tank. Then

replace the water tank cover.

Note: the appliance is supplied with a detachable tank for easy cleaning, you can ll the tank with

water rstly, and then put the tank into the appliance.

2. Set steel mesh into metal funnel (no coffee in steel mesh). make sure the tube on the funnel ali-

gns with groove in the appliance, then insert the funnel into the appliance as indicating of “INSERT”

mark, and you can x them into coffee maker rmly through turn it anticlockwise until it is fully locked.

3. Place an espresso cup (yourself cup) on removable drip plate. Make sure the knob is on the po-

sition which is the“ ”position.

Note: the appliance is not equipped with jug, please use yourself jug or coffee cup.

4. Connect to power source, press the ON/OFF switch. The power indicator (red) will be illuminated.

5. Turn the knob to the “ ” position, the pump will pump water, when there is water owing out

and close the pump by turning knob again to the “ ” position, make sure the steam button is on

the higher position which is the “ ” position and waiting for a moment, the appliance begins to be

pre-heated until the ready indicator (blue) is illuminated, it shows the pre-heating is nish. Turn the

knob to the “ ” position again, and water will ow out.

6. After about one minute, turn the knob to the “ ” position to stop brewing, you can pour the water

in each container out then clean them thoroughly, now you can start brewing.

Pre-heating

To make a cup of good hot Espresso coffee, we recommend you preheating the appliance before

making coffee, including the funnel, lter and cup, so that the coffee avour can not be inuenced

by the cold parts.

1. Remove the detachable tank and open the tank cover to ll it with desired water, the water level

should not exceed the “MAX” mark in the tank. Then place the tank into the appliance properly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beper BC001 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beper BC001 Manual

Product: