710519

Beper BC001 Manual

14
Zoom out
Zoom in
Previous page
1/44
Next page
14
Espresso machine Use instructions
Clean and maintenance
1 - Cut off power source and let the coffee maker cool down completely before cleaning.
2 - Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip tray
and removable shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for clea-
ning.
3 - Detach the metal funnel through turn it clockwise, get rid of coffee residue inside, then you can
clean it with cleanser, but at last you must rinse with clear water.
4 - Clean all the attachments in the water and dry thoroughly.
Claning material deposit
1. To make sure your coffee maker operating efciently, internal piping is cleanly and the peak avor
of coffee, you should clean away the mineral deposits left every 2-3 months.
2. Fill the tank with water and descaler to the MAX level ( the scale of water and descaler is 4:1, the
detail refers to the instruction of descaler. Please use “household descaler”, you can use the citric
acid (obtainable from chemist’s or drug stores) instead of the descaler (the one hundred parts of
water and three parts of citric acid).
3. According to the program of pre-heating, put the metal funnel (no coffee powder in it) and carafe
(jug) in place. Brewing water per “ PRE-HEATING”.
4. Press the ON/OFF switch, the power indicator (red) will be illuminated, you should turn the knob
to the position, make sure the steam button is on the higher position which is the “ ” position,
when there is water owing out and close the pump by turning the knob to the“ ” position, and
waiting for a moment, the coffee maker begins to be heated.
5. When the ready indicator (blue) is illuminated, it shows the heating is nish. Turning the knob to
the“ ” position and make make two cups coffee (about 2Oz). Then close the pump and wait for 5s.
6. Press down the steam button to the lower position which is the “ ” position, waiting for until the
yellow indicator is illuminated. Make steam for 2 minutes, then turn the knob to the“ ”position to
stop making steam. Press the power switch to stop the unit immediately, make the descalers deposit
in the unit at least 15 minutes.
7. Restart the unit and repeat the steps of 4-6 at least 3 times.
8. Then pressing and release the steam button to the higher position which is the “ ”position,
when the blue lamp is illuminated, Turning the knob to the“ ” position to brew until no descaler
is left.
9. Then brewing coffee (no coffee powder) with tap water in the MAX level, repeat the steps of 4-6
for 3 times (it is not necessary to wait for 15 minutes in step of 6), then brewing until no water is left
in the tank.
10. Repeat the step of 9 at least 3 times to make sure the piping is cleanly.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BC001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BC001 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info