577368

Benning ST 750A Manual

43
Zoom out
Zoom in
Previous page
1/58
Next page
08/ 2012 43 / 58
BENNING ST 750 A
16.3 Programming
By the factory, the barcode scanner has been set for optimum interaction with the BENNING ST 750 A
Appliance Tester. Nevertheless, in case of any problems regarding the communication between the
barcode scanner and the BENNING ST 750 A Appliance Tester (e.g. barcode reader reads suc-
cessfullyandconrmationbyacousticsignalexists,butnosearchfor/displayingofthetestsample
by the BENNING ST 750 A), please check the programming of the barcode reader with regard to
standardspecications.Forthis,itisnecessarytoreadasequenceofbarcodes.
Toconclude,checkwhetherthetestno."10047"isidentiedcorrectly.Otherwise,runthroughthe
congurationsequenceagain!
The barcode scanner with the part no. "009369" has to be programmed according to the
following sequence:
BENNING ST 750 A
50 / 68
Barcodeleser Teilekennzeichnung „009369“, ist nach folgender Sequenz
zu programmieren:
Set All Defaults:
 
Start Configuration:
 
RS-232 Mode:

Medium:

1. 1st Set:

All Codes:

1:

2. Complete:

>:

2. Complete:

End Configuration:
 
Save Parameters:
 
Test-ID.: ST750A

Der Barcodeleser sucht im Gerätetester BENNING ST 750A den Prüfling
„ST750A“. Ist die gelesene Barcode-Id in der Datenbank unter dem
ausgewähltem Kunden nicht vorhanden, wird „Dieser Prüfling ist nicht
vorhanden, soll er angelegt werden?“ angezeigt, wählen sie <JA> um den
Prüfling neu in der Datenbank anzulegen.
BENNING ST 750 A
50 / 68
Barcodeleser Teilekennzeichnung „009369“, ist nach folgender Sequenz
zu programmieren:
Set All Defaults:
 
Start Configuration:
 
RS-232 Mode:

Medium:

1. 1st Set:

All Codes:

1:

2. Complete:

>:

2. Complete:

End Configuration:
 
Save Parameters:
 
Test-ID.: ST750A

Der Barcodeleser sucht im Gerätetester BENNING ST 750A den Prüfling
„ST750A“. Ist die gelesene Barcode-Id in der Datenbank unter dem
ausgewähltem Kunden nicht vorhanden, wird „Dieser Prüfling ist nicht
vorhanden, soll er angelegt werden?“ angezeigt, wählen sie <JA> um den
Prüfling neu in der Datenbank anzulegen.
BENNING ST 750 A
50 / 68
Barcodeleser Teilekennzeichnung „009369“, ist nach folgender Sequenz
zu programmieren:
Set All Defaults:
 
Start Configuration:
 
RS-232 Mode:

Medium:

1. 1st Set:

All Codes:

1:

2. Complete:

>:

2. Complete:

End Configuration:
 
Save Parameters:
 
Test-ID.: ST750A

Der Barcodeleser sucht im Gerätetester BENNING ST 750A den Prüfling
„ST750A“. Ist die gelesene Barcode-Id in der Datenbank unter dem
ausgewähltem Kunden nicht vorhanden, wird „Dieser Prüfling ist nicht
vorhanden, soll er angelegt werden?“ angezeigt, wählen sie <JA> um den
Prüfling neu in der Datenbank anzulegen.
Thebarcodescannerwillsearchforthetestsamplecalled"ST750A"intheBENNINGST750A.If
the barcode ID read does not exist in the database under the selected customer, the following mes-
sagewillbedisplayed:"Thistestsampledoesnotexist.Doyouwanttocreateit?".Select<Yes> to
create the test sample in the database.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning ST 750A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning ST 750A in the language / languages: English as an attachment in your email.

The manual is 7,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benning ST 750A

Benning ST 750A User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info