577341

Benning MM 1.2 Manual

26
Zoom out
Zoom in
Previous page
1/169
Next page
17
200 nF 100 pF
± (1.9 % of the measured value + 8 digits)
2 µF 1 nF
± (1.9 % of the measured value + 8 digits)
20 µF 10 nF
± (1.9 % of the measured value + 8 digits)
200 µF 100 nF
± (1.9 % of the measured value + 8 digits)
2 mF 1 µF
± (1.9 % of the measured value + 8 digits)
< 10 digits in case of uctuating indication
7.8 Frequencyranges(BENNING MM 1-2/ 1-3)
Overload protection for frequency measurements: 600 V
eff
Minimum pulse width > 25 ns; operating cycle limitation > 30 % and < 70 %
Measuring
range
Resolution Measuring accuracy for 5 Veff max. Sensitivity
2 kHz 1 Hz
± (0.01 % of the measured value + 1 digits)
> 1.5 < 5 V
eff
20 kHz 10 Hz
± (0.01 % of the measured value + 1 digits)
> 1.5 < 5 V
eff
200 kHz 100 Hz
± (0.01 % of the measured value + 1 digits)
> 1.5 < 5 V
eff
2 MHz 1 kHz
± (0.01 % of the measured value + 1 digits)
> 2 < 5 V
eff
20 MHz 10 kHz
± (0.01 % of the measured value + 1 digits)
> 2 < 5 V
eff
7.9 Temperature ranges °C (BENNING MM 1-3)
Temperature measurements (BENNING MM 1-3) are possible by means of the
enclosed temperature measuring adapter only.
Overload protection for temperature measurements: 600 V
eff
Measuring range Resolution Measuring accuracy
-20 °C ~ 0 °C 1 °C ± (2 % + 4 °C)
1 °C ~ 100 °C 1 °C ± (1 % + 3 °C)
101 °C ~ 500 °C 1 °C ± (2 % + 3 °C)
501 °C ~ 800 °C 1 °C ± (3 % + 2 °C)
7.10 Temperature ranges °F (BENNING MM 1-3)
Temperature measurements (BENNING MM 1-3) are possible by means of the
enclosed temperature measuring adapter only.
Overload protection for temperature measurements: 600 V
eff
Measuring range Resolution Measuring accuracy
-4 °F ~ 32 °F 1 °F ± (2 % + 8 °F)
33 °F ~ 212 °F 1 °F ± (1 % + 6 °F)
213 °F ~ 932 °F 1 °F ± (2 % + 6 °F)
933 °F ~ 1472 °F 1 °F ± (3 % + 4 °F)
8. Measuring with the BENNING MM 1‑1/ 1‑2/ 1‑3
8.1 Preparing the measurement
Operate and store the BENNING MM 1-1/ 1-2/ 1-3 at the specied storage and
operating temperatures only!
Do not permanently expose the device to sunlight.
- Check stated nominal voltage and nominal current on the safety measuring
leads. Nominal voltage and current of the enclosed safety measuring leads
comply with the respective values of the BENNING MM 1-1/ 1-2/ 1-3.
- Check insulation of the safety measuring leads. If the insulation is damaged,
the safety measuring leads must be replaced immediately.
- Check the safety measuring leads for continuity. If the conductor in the
safety measuring lead is interrupted, replace the safety measuring leads
immediately.
- Before selecting another function by means of the rotary switch 8, discon-
nect the safety measuring leads from the measuring point.
-
Strong sources of interference in the vicinity of the BENNING MM 1-1/ 1-2/ 1-3
might involve unstable readings and measuring errors.
8.2 Voltage and current measurement
Do not exceed the maximum permitted voltage with respect to
earth potential! Electrical danger!
The highest voltage which may be applied to the
09/ 2013
BENNING MM 1-1/ 1-2/ 1-3
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning MM 1.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning MM 1.2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 12,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info