656672
17
Zoom out
Zoom in
Previous page
1/24
Next page
17
ULTRALINK UL2000M
If the receiver is not powered on, no status is indicated. Briefly pressing the POWER button
will neither turn the transmitter on nor off!
3.3.2 Transmission frequency
1. Turn the selection switch to 9. The position of the MUTE switch is irrelevant.
2. Briefly press the POWER button.
3. Just like during programming, 6 blink medium-tempo codes indicate the individual digits that make up
the transmission frequency. Individual codes are separated from one another by brief pauses.
The value 0 is signaled by a very short blink of the LED, and you will easily tell a
0 from a 1.
If the receiver is not powered on, no status is indicated. Briefly pressing the POWER button
will neither turn the transmitter on nor off!
3.3.3 Preset
1. Make sure that the microphone is not set to mute (MUTE switch is set to OFF).
2. Turn the selection switch to 1, 2, 3 or 4 and confirm your selection by briefly pressing the POWER
button.
3. The LED indicates the preset number with the corresponding number of medium-tempo blinks.
3.3.4 Mic Gain
1. Make sure that the microphone is not set to mute (MUTE switch is set to OFF).
2. Turn the selection switch to 5 or 6 and confirm your selection by briefly pressing the POWER button.
3. The LED indicates the Mic Gain status with the corresponding number of medium-tempo blinks:
Low Gain: The LED blinks once with medium tempo.
High Gain: The LED blinks twice with medium tempo.
3.3.5 Auto Mute
1. Make sure that the microphone is not set to mute (MUTE switch is set to OFF).
2. Turn the selection switch to 7 or 8 and confirm your selection by briefly pressing the POWER button.
3. The LED indicates the Auto Mute status with the corresponding number of medium-tempo blinks::
Auto Mute turned off: The LED blinks once with middle tempo.
Auto Mute turned on: The LED blinks twice with middle tempo.
3.5 ULM2000 level setting
To optimally set the level on your ULM2000, the High Gain or Low Gain setting has to be set
to the level of the signal being transmitted (ch. 3.2.5).
Adjust the gain control in the microphone channel of your mixing console so that the peak LED lights up only
occasionally or never at all. The EQ controls in the microphone channel should be set to mid-travel position
to start with. To get the sound you want, try changing the mic position relative to the sound source or even
move the microphone around in the recording room of your studio. Adjusting the angle at which walls face the
sound source can also be helpful. Only when the desired basic sound has been achieved should you start to
use equalizers and signal processors, if any at all (remember: less is often more!)
3. ULM2000 MICROPHONE
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Ultralink UL2000M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Ultralink UL2000M in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer Ultralink UL2000M

Behringer Ultralink UL2000M User Manual - German - 24 pages

Behringer Ultralink UL2000M User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info