656672
19
Zoom out
Zoom in
Previous page
1/24
Next page
19
ULTRALINK UL2000M
5.2 Installation in a rack
The ULR2000’s antennae are located in the front of the unit. This allows unproblematic installation
in a rack.
Each unit is delivered with a rack bracket and a connecting joint. This way, you can choose:
1. If you wish to install only one unit in a rack, mount a rack bracket to one of the sides. In this case, you
will not need the included connecting joint. Now, install one side of the receiver into the rack.
2. To install 2 receivers in a rack, first connect the two receivers to one another at the bottom using the
connecting joint. Mount one rack bracket on the left side of one unit and one rack bracket on the right
side of the other unit. Now, both ULR2000s can be installed in a rack.
To assure good reception, if possible, install the ULR2000 as high in a rack as possible, so
that the antennae protrude above the upper edge of the rack.
The ULR2000 requires one height unit (1 HE) for installation in a 19-inch rack. Please assure that there are
additional 10 cm (4 inches) of free space in the back for connecting cables.
For installation in a rack, use M6 machine screws and nuts.
Be sure that there is plenty of space around the unit for cooling and, to avoid overheating, please do not
place the ULR2000 on top of power amplifiers or other heat-emitting equipment.
If you wish to install more than 2 units in a rack, please make sure that there is enough space between them
(fig. 5.1). The lower units antennae may not perturb against the upper units antennae. Otherwise, they could
interfere with one another, causing a decrease in reception quality.
Fig. 5.1: Arrangement of multiple ULR2000s when installed on top of each other
5. INSTALLATION
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Ultralink UL2000M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Ultralink UL2000M in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer Ultralink UL2000M

Behringer Ultralink UL2000M User Manual - German - 24 pages

Behringer Ultralink UL2000M User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info