Manual Beha-Amprobe HD160C (page 12 of 148) (English, German, French, Italian, Swedish, Spanish)

707174

Zoom out

Zoom in

1/148

Measuring AC Voltage - True rms (See Figure 2)

1. Set the Function Switch to K.

2. If

RANGE is displayed, press the RANGE button to enable auto ranging.

3. Connect the test leads: Red to

Temp VΩHz, Black to COM

4. Connect the test leads to the circuit test points.

5. Read the display, and, if necessary, correct any overload (OL) conditions.

True rms AC Measurements

Model HD160C is an ac-coupled True rms measuring meter. It measures the True rms value

of distorted AC voltage or current signals. The Crest Factor handling capability is shown in

Table 1. The Crest Factor is the Peak Voltage divided by the rms voltage.

5.0

4.0

3.0

2.5

1.0

100%806040200

Wave form,Crest Factor

Additional correction from 1.5 to 5.0

Input RMS, Percentage of Full-Scale

Table 1 - Crest Factor Handling Capability

Note: To accurately measure a DC voltage with an AC component, measure the AC

component ﬁrst with selector switch set to K. Note the measurement and range used.

Switch to L, activate Range Lock (see Button Functions later in this manual) and select a

range equal to or higher then the K range used previously. Note the measurement. The

result is the measured AC Voltage on top of the measured DC component. (Max input is

1500 V dc or 1000 V ac).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beha-Amprobe HD160C in the language / languages: English, German, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beha-Amprobe HD160C Manual

Product: