Manual Beha-Amprobe HD160C (page 14 of 148) (English, German, French, Italian, Swedish, Spanish)

707174

Zoom out

Zoom in

1/148

Continuity Test (See Figure 5)

1. Set the Function Switch to R.

2. Connect the test leads: Red to

Temp VΩHz, Black to COM.

3. Turn off power to the circuit being measured.

4. Discharge any capacitors that may inﬂuence the reading.

5. Connect the test leads across the resistance.

6. Listen for the tone that indicates continuity (< 40

Ω).

When measuring continuity the meter emits a continuous tone when the resistance value

falls below 40 Ω.

Resistance Measurement (See Figure 6)

1. Set the Function Switch to Ω.

2. If

RANGE is displayed, press the RANGE button to enable auto ranging.

3. Connect the test leads. Red to

Temp VΩHz, Black to COM.

4. Turn off power to the circuit being measured. Never measure resistance across a

voltage source or on a powered circuit.

5. Discharge any capacitors that may inﬂuence the reading.

6. Connect the test leads across the resistance.

7. Read the display. If OL appears on the highest range, the resistance is too large to

be measured.

Note: When measuring very low resistances, use Relative Measurement to eliminate the

test lead resistance (see Button Functions later in this manual).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beha-Amprobe HD160C in the language / languages: English, German, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beha-Amprobe HD160C Manual

Product: