806831
8
Zoom out
Zoom in
Previous page
1/9
Next page
NOISES MADE BY THE HOB
ERROR CODE DESCRIPTION POSSIBLE CAUSES ERROR ELIMINATION
C81, C82 The control panel switches o because
of excessively high temperatures.
The internal temperature of
electronic parts is too high.
Wait for the hob to cool down
before using it again.
F42 or F43 The connection voltage is wrong.
The sensor detects a discrepancy
between the appliance voltage
and that of the mains supply.
Disconnect the hob from the mains
and check the electrical connection.
F12, F21, F25, F36, F37, F40, F47,
F56, F58, F60 Call the After-Sales Service and specify the error code.
TROUBLESHOOTING
If the hob will not operate correctly, before calling the After-Sales Service,
refer to the Troubleshooting Guide to determine the problem.
Read and follow the instructions given in the section “Daily use”.
Check that the electricity supply has not been shut o.
Dry the hob thoroughly after cleaning it.
If, when the hob is switched on, alphanumeric codes appear on the
display, consult the following table for instructions.
If the hob cannot be switched o after using it, disconnect it from the
power supply.
If after the above checks the fault still occurs, get in touch with the nearest
After Sales Service.
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the
characteristics of the pan bottoms (for example, when the bottoms are
made from dierent layers of material or are irregular).
These noises may vary according to the type of cookware used and to the
amount of food it contains and are not the symptom of something wrong.
MAINTENANCE AND CLEANING
Disconnect the appliance from the power supply.
Do not use steam cleaning equipment.
Do not use abrasive sponges or scouring pads as they may damage
the glass.
After each use, clean the hob (when it is cool) to remove any deposits
and stains from food residue.
Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
Salt, sugar and sand could scratch the glass surface.
Use a soft cloth, absorbent kitchen paper or a specic hob cleaner
(follow the Manufacturer’s instructions).
Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
After cleaning the hob, dry thoroughly.
EN
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht CHI 6640F IN-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht CHI 6640F IN-01 in the language / languages: English as an attachment in your email.

The manual is 1.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht CHI 6640F IN-01

Bauknecht CHI 6640F IN-01 User Manual - German - 9 pages

Bauknecht CHI 6640F IN-01 User Manual - Dutch - 12 pages

Bauknecht CHI 6640F IN-01 User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info