Electrical connection must be made before connecting the appliance to the electricity supply.
Installation must be carried out by qualied personnel who know the current safety and installation regulations. Specically, installation must be carried
out in compliance with the regulations of the local electricity supply company.
Make sure the voltage specied on the data plate located on the bottom of the appliance is the same as that of the home.
Regulations require that the appliance be earthed: use conductors (including the earth conductor) of the appropriate size only.
IMPORTANT!
•Electrical connection must be made before connecting the oven to the electricity supply.
•The appliance must be earthed.
•For electrical connection, refer exclusively to the instructions given in the following paragraph, ignoring the connections indicated on the underside
of the hob.
CONNECTING THE CABLE INCLUDED TO THE TERMINAL BLOCK
1.Remove the terminal block screws and the jumpers.
2.Connect the wires to the terminal block as shown in the wiring diagram below.
Secure the cable with the cable clamp next to the protective black sheath.
3.Remove the terminal block cover (A), undoing the screw and inserting the cover in the terminal block hinge (B). Close the cover (C) and screw it on
the terminal block.
123
Legend:
- R = brown
- S = brown
- E = yellow/green
- N = blue
CONNECTION TO THE OVEN
ATTENTION: Do not connect the oven to the power supply before you have nished connecting the cooktop.
•Before connecting the oven to the power supply, make sure that the cooktop is among the ones listed in the cooktop/oven pairing product sheet
provided.
•Connect the hob connectors (E) to the oven connectors (D), matching the colours and the alignment of the housing guides visible on the top of the
connectors.
•Then make the connection by pushing the connectors all the way in, making sure that the tongue clicks into place.
•Unscrew the nut of the earth screw (K)
on the top cover of the oven and insert the yellow/green earth wire, leaving the washer in place. Screw
the nut back onto the screw and tighten it as far as it will go.
•Cover the connected cables (H) with the metal cover (F), taking care that the cables are not trapped under the cover.
•Tighten the two screws (G) to secure the metal cover provided with the oven.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bauknecht CHI 6640F IN-01 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bauknecht CHI 6640F IN-01 in the language / languages: English as an attachment in your email.
The manual is 1.02 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
