Manual Batavia XXL SPEED SAW Mini BT-CS001 (page 28 of 64) (English, German, Dutch, French)

589451

Zoom out

Zoom in

1/64

1. Turn two edge guide locking screws (1)

counter clockwise a few turns until the screws

rise about 1/8".

2. Insert edge guard rod (2) into the edge guide

mounting block slot (3).

3. Slide edge guard toward the tool until the

desired width of cut is indicated on the scale

(4) where it meets the edge of the edge guide

mounting block.

4. Tighten both edge guide locking screws.

NOTES:

a) Do not over tighten the edge guide locking screws

or you will break the edge guide mounting block.

b) The edge guide scale is only an approximate

measurement. Always check the width of cut on a

scrap workpiece.

6.9 ON/OFF switch

This tool has dual purpose ON/OFF switch that is

designed to prevent accidental starting of the tool. It

also automatically turns the tool OFF then the switch

is not held in the ON position.

1. Press the center of the switch (1) inward.

2. While holding the center of the switch inward,

slide the switch button (2) forward until the tool

starts.

3. To stop the tool, release the switch button. It

will automatically turn the tool OFF.

6.10 Blade guard with V prole

See page 26 for dismounting the blade guard. The

V-shape in the blade guard gives a rm hold to round

tubes, allowing them to be cut properly. Is the tube

diameter too big to be cut at once you can rotate

the tube while cutting.

c) Always test the depth setting on a scrap

workpiece to verify the setting before cutting into

the good workpiece.

6.7 Install edge guide mount

1. Insert the edge guide dovetail (1) into the

matching slot (2) in the front of the blade guard.

2. Slide the edge guide mount toward the right

hand side of the blade guard until the mounting

screw (3) lines up with the matching threaded

hole (4) in the blade guard.

3. Carefully turn the mounting screw clockwise

into the threaded hole until it holds the edge

guide rmly in place.

4. Tighten the mounting screw using a 5 mm hex

key. NOTE: Do not over tighten the mounting

screw. You will break the blade guard.

6.8 Install edge guide

The multi-cutter can be used with an edge guide

for ripping materials up to 6" wide.

I have a Batavia BT-CS001 XXL speed saw . Brilliant saw but one of the windings on the motor has gone open circuit . Can you supply a new replacement motor ? Submitted on 25-4-2020 at 13:49
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia XXL SPEED SAW Mini BT-CS001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Batavia XXL SPEED SAW Mini BT-CS001

Batavia XXL SPEED SAW Mini BT-CS001 Additional guide - English, German, Dutch, French - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia XXL SPEED SAW Mini BT-CS001 Manual

Product: