589451
26
Zoom out
Zoom in
Previous page
1/64
Next page
6.2 Remove blade guard
1. Insert 5 mm hex key (1) into the blade guard
fulcrum nut (2).
2. Turn hex key counter clockwise to remove the
blade guard fulcrum nut.
3. Slide blade guard fulcrum bolt (3) out of the
blade guard (4).
4. Carefully slide the blade guard off the tool.
6.3 Remove blade
Warning! Always unplug the tool from
the power source before making any
adjustments or changing the blade.
Warning! Always be extremely careful
when handling blades. They will be
extremely hot immediately after use.
They are also very sharp and may
cause serious injury.
1. Insert the 5 mm hex key (1) into the arbor
screw (2) on the LEFT side of the tool.
2. Press inward on the spindle lock button (3)
which is located on the RIGHT side of the tool.
3. Rotate the hex key CLOCKWISE while
pressing on the spindle lock button until the
spindle lock button engages the spindle.
4. Continue to rotate the arbor screw in a
26
TM
should also be considered such as, for example,
continued turning and idling of the tool).
Limit noise and vibration to a minimum!
Use only problem free electric power tools.
Regularly maintain and clean the electric
power tool.
Adapt your working methods to the electric
power tool.
Do not overload the electric power tool.
Have the electric power tool inspected, if
necessary.
Switch the electric power tool off when it is not
in use.
6. ASSEMBLY AND OPERATION
This multi-cutter precision saw is a versatile tool
that is designed for use in conned work spaces.
By selecting the appropriate cutting blades, it will
cut copper and aluminum tubing, ceramic and
marble tile, and assorted wood products. The
following assembly and operating instructions will
explain the tool and its operation in detail.
6.1 Install vacuum adaptor
The vacuum adaptor can be used to attach a
workshop vacuum hose to the tool. This will prevent
most cutting dust from escaping into the work area.
1. Line up the tabs on the small end of the
vacuum adaptor (1) with the matching slots (2)
in the vacuum port (3) in the rear of the tool.
2. Push the vacuum adaptor into the vacuum port
as far as it will go.
3. Twist the vacuum adaptor clockwise to lock it
into position.
26


Need help? Post your question in this forum.

Forumrules
1

Forum

batavia-xxl-speed-saw-mini-bt-cs001

Reset search

  • I have a Batavia BT-CS001 XXL speed saw . Brilliant saw but one of the windings on the motor has gone open circuit . Can you supply a new replacement motor ? Submitted on 25-4-2020 at 13:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia XXL SPEED SAW Mini BT-CS001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia XXL SPEED SAW Mini BT-CS001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Batavia XXL SPEED SAW Mini BT-CS001

Batavia XXL SPEED SAW Mini BT-CS001 Additional guide - English, German, Dutch, French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info