Manual Batavia XXL SPEED SAW Mini BT-CS001 (page 29 of 64) (English, German, Dutch, French)

589451

Zoom out

Zoom in

1/64

avoid the blade touching the workpiece when

the blade guard is raised to expose the blade

as outlined in instruction.

7. Turn switch ON as outlined on Page 28.

NOTE: Do not proceed any further until the

blade is running at full speed.

8. Using the thumb on your left hand, press the

blade guard release button (6).

9. Gently press downward on the front of the tool

to raise the blade guard until it touches the

depth control stop (9).

10. Re-check the alignment of the front cut line

indicator (7) and the cutting line marked on the

workpiece (8).

11. Slowly move the tool forward until the blade

touches the workpiece and begins to cut at the

cutting line. NOTE: Feed the blade into the

workpiece at a slow steady pace. Do not force

the tool so the motor slows down. The red

“overload” light (10) will illuminate if the motor

is being overloaded. The blade will cut faster

and cleaner when turning at full speed.

Warning! Never try to cut a curve. This

tool is designed only for straight line

cuts. Attempting to cut curves will

damage the blade, make rough cuts and

possible break the blade. Serious injury

may result.

When the cut is completed, release the ON/OFF

switch and wait for the blade to come to a complete

stop before removing the tool from the workpiece.

Warning! Make sure the blade guard

returns to its normal position

covering the blade before taking your

hands off the tool.

6.12 Cutting (with edge guide)

To cut using the edge guide, follow the same basic

principles as noted in Paragraphs 1 through 11

above. Instead of following a cutting line, you will

simply set the edge guide at the appropriate width

and hold the guide shoe (1) against the edge of the

workpiece (2) to guide the blade in a straight line.

6.11 Cutting (without edge guide)

Warning! Always use two hands on

the tool when cutting. This will make

operation of the tool easier and

promote maximum safety.

1. Install appropriate cutting blade in the tool.

2. Adjust cutting depth as outlined on Page 27.

3. Plug the tool cord into the power source.

NOTE: The green “power on” light (1) on the

right hand side of the tool will illuminate when

power is “live”.

4. Place leading edge of the blade guard (2) on

the workpiece to be cut.

5. Grasp the tool with two hands. Place your right

hand on the body of the tool (3) being careful

not to cover the motor vents (4). Place your

left hand on the forward part of the tool (5) so

your thumb can operate the blade guard

release button (6).

6. Line up front cut line indicator (7) with the

cutting line marked on the workpiece (8).

NOTE: Do not place the blade guard too far

forward on the workpiece. This is important to

I have a Batavia BT-CS001 XXL speed saw . Brilliant saw but one of the windings on the motor has gone open circuit . Can you supply a new replacement motor ? Submitted on 25-4-2020 at 13:49
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia XXL SPEED SAW Mini BT-CS001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Batavia XXL SPEED SAW Mini BT-CS001

Batavia XXL SPEED SAW Mini BT-CS001 Additional guide - English, German, Dutch, French - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia XXL SPEED SAW Mini BT-CS001 Manual

Product: