Manual Batavia CROC SAW BT-JCS001 (page 29 of 64) (English, German, Dutch, French)

589480

Zoom out

Zoom in

1/64

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic

parts. Most plastic are susceptible to damage

from various types of commercial solvents and

may be damaged by their use. Use clean

cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake uids, gasoline,

petroleum-based products, penetrating oils.

etc. , come in contact with plastic parts.

Chemicals can damage, weaken, or destroy

plastic, which could result in serious personal

injury.

CHAIN TENSION

See Figures 11-13.

WARNING:

To avoid possible serious injury, never touch or

adjust the chain while the motor is running.

The saw chain in very sharp; always wear

protective gloves when performing

maintenance to the chain.

Fig. 11

FRONT

HANDLE

LOWER

JAW LOCK

BUTTON

CHAIN

COVER

BOLT

CHAIN

TENSIONING

SCREW

LOWER

JAW

dangerous. Leave larger cutting operations

for professionals.

• When cutting branches that are lying on the

ground, make sure the location is clear of

other objects, electric wires, cables etc. ,

before cutting. Also be aware of the position

of your feet before cutting items on the

ground.

• Make sure the tool is running at full speed

before attempting to cut.

• Allow chain to cut for you; exert only light

downward pressure. If you force the cut,

damage to the bar, chain or motor can

result.

• Release the trigger as soon as the cut is

completed.

WARNING:

If bar and chain become jammed, stop the

motor, allow the chain to stop, and disconnect

the plug from the power source before

attempting to remove the obstruction. Failure

to follow these steps could result in accidental

starting of the lopper and cause serious

personal injury.

Failure to follow proper cutting procedures can

result in the bar and chain binding and

becoming pinched or trapped in the limb. If this

should happen:

• Stop the motor and disconnect from power

supply.

• If the limb can be reached from the ground,

lift the limb while holding the saw. This

should release the “pinch” and free the saw.

• If the saw is still trapped, call a professional

for assistance.

WARNING:

Before inspecting, cleaning or servicing the

unit, stop the motor, wait for all moving parts to

stop, and disconnect from power supply.

Failure to follow these instructions can result

in serious personal injury or property damage.

Croc Saw Manual.indb 29 24-04-14 11:18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia CROC SAW BT-JCS001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia CROC SAW BT-JCS001 Manual

Product: