589480

Batavia CROC SAW BT-JCS001 Manual

27
Zoom out
Zoom in
Previous page
1/64
Next page
27
EN
CHAIN
LUBRICANT
Fig. 5
OIL
RESERVOIR
CAP
QUICK VIEW
OIL INDICATOR
• Replace the cap and tighten securely
• Wipe off excess lubricant
• Check and fill the oil tank when quick view
oil indicator is below the MIN indicator line
• Check the tank every time the lopper is
used
• Repeat as needed
NOTE: Do not use dirty, used, or otherwise
contaminated lubricants. Damage may occur
to the bar or chain.
NOTE: It is normal for oil to seep from the saw
when not in use. To prevent seepage, empty
the oil tank after each use then run for one
minute. When storing the unit for a long period
of time (three months of longer) be sure the
chain is lightly lubricated; this will prevent rust
on the chain and bar sprocket.
CONNECTING TO POWER SUPPLY
See Figure 6.
This product is designed with a cord retainer
that prevents the extension cord from being
pulled loose while using.
LOCK-OUT
BUTTON
SWITCH TRIGGER
CORD RETAINER
Fig. 6
NOTICE: Always use cord retainer to properly
attach extension cord to lopper. Failure to use
cord retainer may result in damage to lopper
and/or extension cord.
• Form a loop with the end of the extension
cord
• Insert loop portion of extension cord
through opening in the bottom of the rear
handle and place over cord retainer
• Slowly pull loop against cord retainer until
the slack is removed
• Plug product into extension cord
NOTE: Failure to remove all excess cord slack from
extension cord retainer could result in plug loosening
from receptacle.
STARTING AND STOPPING
See Figure 6.
To start the motor:
• Connect the lopper to power supply
• Use your thumb to depress the lock-out
button and fully depress the switch trigger
To stop the motor:
• Release the switch trigger
HOLDING THE LOPPER
See Figure 7.
Croc Saw Manual.indb 27 24-04-14 11:18
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia CROC SAW BT-JCS001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia CROC SAW BT-JCS001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info