589480
26
Zoom out
Zoom in
Previous page
1/64
Next page
Failure to do so could result in objects being
thrown into your eyes and other possible
serious injuries.
Warning: Do no use any attachments or
accessories not recommended by the
manufacturer of this product. The use of
attachments or accessories not recommended
can result in serious personal injury.
Warning: Never position the front
handle so that it is forward to the vertical
upright position. Positioning the handle in this
forward area could cause the operator to lose
control of the electric chainsaw and result in
serious personal injury.
APPLICATIONS:
You may use this product for the purposed
listed below:
Limbing
Pruning
ADDING BAR AND CHAIN LUBRICANT
See Figure 5.
Use Premium Bar and Chain Lubricant. It is
designed for chains and chain oilers, and is
formulated to perform over a wide temperature
range with no dilution required.
NOTE: Lopper comes from the factory with no
bar and chain oil added. Level should also be
checked after every 20 minutes of use and
relled as needed.
Disconnect the lopper from the power
supply
Remove oil reservoir cap
Carefully pour the bar and chain lubricant
into the tank
26
TM
Warning: Never position the front
handle so that it is forward of the vertical
upright position. Positioning the handle in this
forward area could cause the operator to lose
control of the electric chainsaw and result in
serious personal injury.
See Figure 4.
Danger: Never cut near power lines,
electric cords, or other electric sources. If
bar and chain jams on any electrical cord
or line, DO NOT TOUCH THE BAR OF
CHAIN! THEY CAN BECOME
ELECTRICALLY LIVE AND VERY
DANGEROUS.
Continue to hold the lopper by the
insulated rear handle or lay it down and
away from you in a safe manner.
Disconnect the electrical service to the
damaged line or cord before attempting to
free the bar and chain from the line or cord.
Contact with bar, chain, other conductive
parts of the electric chainsaw, or live
electric cord or lines will result in death by
electrocution, electric shock, or serious
personal injury.
Warning: Do not operate the electric
chainsaw if the upper or lower guard is broken,
cracked, missing, or damaged in any way.
Operating the lopper with missing or damaged
guards could result in accidental contact with
the moving chain and cause serious personal
injury.
Warning: Do not allow familiarity with
this product to make you careless. Remember
that a careless fraction of a second is sufcient
to inict serious injury.
Warning: Always wear eye protection
with side shields along with head protection.
Croc Saw Manual.indb 26 24-04-14 11:18
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia CROC SAW BT-JCS001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia CROC SAW BT-JCS001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info