Manual Batavia BT-CS015 - 7062848 (page 10 of 50) (English, German, Dutch, French)

758290

Zoom out

Zoom in

1/50

English

k. Be aware that the blade will project

from the underside of the workpiece.

l. Do not reach beneath the workpiece

where the guard cannot protect you

from the blade.

m. Note the direction of rotation of the

motor and the blade.

n. Inspect the workpiece and remove all

nails and other embedded objects prior

to starting work.

o. Do not apply any sideways or twisting

force to the blade whilst cutting.

p. If a cut does not extend to the edge of

the workpiece, or if the blade binds in

the cut, allow the blade to come to a

complete stop and lift the saw out of

the workpiece.

q. Do not attempt to free a jammed blade

before rst disconnecting the machine

from power.

r. Do not move the saw backwards at any

time whilst cutting.

s. Beware of projected waste. In some

situations, waste material may be pro-

jected at speed from the cutting tool. It

is the user’s responsibility to ensure

other people in the work area are pro-

tected from the possibility of projected

waste.

t. If you are interrupted when operating

the saw, complete the process and

switch off before diverting your

attention.

u. Check the lower guard for proper clo-

sure before each use. Do not operate

the saw if the lower guard does not

move freely and close instantly. Never

clamp or tie the lower guard into the

open position. If the saw is accidentally

dropped, the lower guard may be bent.

Raise the lower guard with the retract-

ing handle and make sure it moves

freely and does not touch the blade or

any other part, in all angles and depths

of cut.

v. Always observe that the lower guard is

covering the blade before resting the

saw on a surface after use. An unpro-

tected, coasting blade will cause the

saw to move backwards, cutting what-

ever is in its path. Be aware of the time

it takes for the blade to stop after the

trigger switch is released.

w. Periodically check that all nuts, bolts

and other xings have not become

loose, and tighten where necessary.

The tool must be used only for its pre-

scribed purpose. Any uses other than those

mentioned in this manual will be considered

a case of misuse. The user, and not the

manufacturer, shall be liable for any damage

or injury resulting from such cases of

misuse.

The manufacturer shall not be liable for any

modications made to the tool nor for any

damage resulting from such modications.

Even when the tool is used as prescribed it

is not possible to eliminate all residual risk

factors.

4. Before using the circular saw

4.1 Check the following points:

• Does the voltage of the motor corre-

spond with the mains voltage (appli-

ances for a mains voltage of 230 V.

• Are the mains lead and the mains plug

in a good condition: solid, without any

loose ends or damage;

• Is the saw blade missing any teeth or

showing any cracks, it so must be

replaced immediately.

• Make sure the blade is secure.

• Use this circular saw to saw only wood,

wood-like products.

• Do not use circular saw blades which

are deformed or damaged.

• Do not use HSS blades.

• Only use blades meeting the required

dimensions, as well as data and

descriptions;

• Do not stop the blade of a circular saw

by pressing the blade from the side.

• Check that the blade guard can freely

move and fully closes.

• Never lock-up the guard in the open

position.

• Never put sideward pressure on the

blade. This may cause the blade to

break.

7062848-Circular_Saw_1400W-Ma-1803-19.indb 8 20-03-18 10:39

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CS015 - 7062848 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CS015 - 7062848 Manual

Product: