Manual Batavia BT-CS015 - 7062848 (page 8 of 50) (English, German, Dutch, French)

758290

Zoom out

Zoom in

1/50

English

instructions and in the manner

intended for the particular type of

power tool, taking into account the

working conditions and the work to be

performed. Use of the power tool for

operations different from intended

could result in a hazardous situation.

2.5 Service

a. Please use a qualied expert who uses

original replacement parts to repair

your power tool. This will ensure proper

functioning of the power tool.

3. Safety instructions for circular

saws

3.1 Cutting procedures

a. DANGER: Keep hands away

from cutting area and the

blade. Keep your second hand

on auxiliary handle, or motor housing.

If both hands are holding the saw, they

cannot be cut by the blade.

b. Do not reach underneath the work-

piece. The guard cannot protect you

from the blade below the workpiece.

c. Adjust the cutting depth to the thick-

ness of the workpiece. Less than a full

tooth of the blade teeth should be visi-

ble below the workpiece.

d. Never hold piece being cut in your

hands or across your leg. Secure the

workpiece to a stable platform. It is

important to support the work properly

to minimise body exposure, blade bind-

ing, or loss of control.

e. Hold the power tool by insulated grip-

ping surfaces only, when performing

an operation where the cutting tool

may contact hidden wiring or its own

cord. Contact with a “live” wire will also

make exposed metal parts of the power

tool “live” and could give the operator an

electric shock.

f. When ripping, always use a rip fence

or straight edge guide. This improves

the accuracy of cut and reduces the

chance of blade binding.

g. Always use blades with correct size

and shape (diamond versus round) of

arbour holes. Blades that do not match

the mounting hardware of the saw will

run eccentrically, causing loss of

control.

h. Never use damaged or incorrect blade

washers or bolts. The blade washers

and bolt were specially designed for

your saw, for optimum performance

and safety of operation.

3.2 Further safety instructions for all saws

3.3 Kickback causes and related warnings

• Kickback is a sudden reaction to a

pinched, bound or misaligned saw

blade, causing an uncontrolled saw to

lift up and out of the workpiece toward

the operator.

• When the blade is pinched or bound

tightly by the kerf closing down, the

blade stalls and the motor reaction

drives the unit rapidly back toward the

operator.

• If the blade becomes twisted or mis-

aligned in the cut, the teeth at the back

edge of the blade can dig into the top

surface of the wood causing the blade

to climb out of the kerf and jump back

toward the operator.

Kickback is the result of saw misuse and/

or incorrect operating procedures or con-

ditions and can be avoided by taking

proper precautions as given below.

a. Maintain a rm grip with both hands

on the saw and position your arms to

resist kickback forces. Position your

body to either side of the blade, but

not in line with the blade. Kickback

could cause the saw to jump back-

wards, but kickback forces can be con-

trolled by the operator if proper precau-

tions are taken.

b. When blade is binding, or when inter-

rupting a cut for any reason, release

the trigger and hold the saw motion-

less in the material until the blade

comes to a complete stop. Never

attempt to remove the saw from the

work or pull the saw backward while

the blade is in motion or kickback may

occur. Investigate and take corrective

actions to eliminate the cause of blade

binding.

7062848-Circular_Saw_1400W-Ma-1803-19.indb 6 20-03-18 10:39

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CS015 - 7062848 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CS015 - 7062848 Manual

Product: