559557

AVM NetWare MultiProtocol Router for ISDN Manual

273
Zoom out
Zoom in
Previous page
1/279
Next page
274 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
ISDN-52: Outgoing call to <Number> subaddress <x> rejected because the called subad-
dress <x> does not exist.
indicates that the Destination Subaddress you configured does not
exist at the remote site. Ask the network administrator of the remote
site which subaddress is assigned for your router to dial to and enter
that subaddress in your ISDN Call Destination entry.
ISDN-53: Outgoing call to <Number> subaddress <x> rejected because the called
subaddress <x> is configured for remote node access.
indicates that the interface you dialed at the remote router is config-
ured for remote node access. When providing remote access for
stand-alone PCs besides routing between LANs, the interface/
interfaces configured for remote node access cannot be used concur-
rently to establish router connections. Ask the network administrator
of the remote site which Destination Subaddress is to be configured in
your ISDN Call Destination entry.
ISDN-54: Outgoing call to <Number> subaddress <x> rejected because the called
subaddress <x> is busy.
indicates that the addressed logical interface of the ISDN-Controller
on the remote site is in use, and therefore the call is rejected by the
ISDN-Controller.
ISDN-55: Outgoing call to <Number> subaddress <x> rejected because the remote router
did not set "Call Acceptance" to "All Numbers" and this number (Caller-Specified) is not
registered to be accepted.
indicates that the outgoing call has not passed the security mecha-
nism of the remote router. Ask the network administrator of the
remote site for information on how to configure your ISDN Call
Destination entry properly to get access, since he has assigned an
interface for your router to dial to.
ISDN-56: Outgoing call to <Number> subaddress <x> rejected because the called ad-
dress does not match the call number components at the remote site.
indicates that the number entered for Destination Address on your
local router is not configured properly to reach the remote router.
Meldunge.pm6 27.05.97, 21:06274
… 273 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM NetWare MultiProtocol Router for ISDN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM NetWare MultiProtocol Router for ISDN in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info