559557
275
Zoom out
Zoom in
Previous page
1/279
Next page
276 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
ISDN-104: Incoming call from <Number> subaddress <x> rejected because the called
subaddress <x> is busy.
indicates that the addressed logical interface of the ISDN-Controller
at your side is already in use, and therefore the call is rejected.
ISDN-105: Incoming call from <Number> subaddress <x> rejected because "Call Accept-
ance" is not set to "All Numbers" and this number is not or not properly configured as a
destination to be accepted.
indicates that the incoming call has not passed the security mecha-
nism of the router. If you want to allow this remote router access to
your network, you have to create an entry in the Call Acceptance
Database for that router. In doing so, you assign a specific interface of
an ISDN-Controller for that router to get access to your LAN.
If you have already created such an Call Acceptance Database entry,
make sure that the Destination Address and Subaddress entered there
are configured properly to call that remote router. Further, make sure
that the remote router's Destination Address and Subaddress in the
ISDN Call Destination entry is configured properly to reach the
interface you have assigned to this router.
ISDN-106: Incoming call from <Number> subaddress <x> rejected because the called
address <Number> does not match the local call number components.
indicates that the number entered for Destination Address on the
remote router is not configured properly to reach your local router.
Your router therefore is not able to generate the correct number to call
the remote router back, since it does not know where the incoming
call came from (PBX or not, location, country, etc.).
ISDN-107: Incoming call from <Number> subaddress <x> rejected because the called
subaddress <x> is not configured for remote node access.
indicates that a stand-alone PC tried to call an interface (a subad-
dress) that is not configured for remote node access.
You can configure that interface for remote node access as well as
provide another interface for this remote PC to get access if you want
to.
Meldunge.pm6 27.05.97, 21:06276
275


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM NetWare MultiProtocol Router for ISDN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM NetWare MultiProtocol Router for ISDN in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info