559557

AVM NetWare MultiProtocol Router for ISDN Manual

272
Zoom out
Zoom in
Previous page
1/279
Next page
System and Error Messages 273
- the meter clock pulse changed and a new selflearning timeout has
been calculated anew.
ISDN-27: Incoming call from <Number> subaddress <x> rejected because the "Call
Status" is set to "Disabled".
indicates that the Call Status of this call destination is disabled and no
outgoing and incoming calls are allowed to and from this remote site.
ISDN-28: Incoming call from <Number> rejected because the budget is reached.
indicates that one of the budget values configured for this call desti-
nation was reached and the call destination was barred for outgoing
and incoming calls. Either set the budget value to (None) or enter a
higher value.
ISDN-29: Outgoing call to <Number> subaddress <x> rejected because the budget is
reached.
indicates that one of the budget values configured for this call desti-
nation was reached and the call destination was barred for outgoing
and incoming calls. Either set the budget value to (None) or enter a
higher value.
ISDN-30: Call to <Number> cleared because the budget is reached.
indicates that one of the budget values configured for this call desti-
nation was reached and the call was therefore cleared. No outgoing or
incoming calls are allowed to or from this call destination. To use this
destination again, either set the budget value to (None) or enter a
higher value.
ISDN-31: COSO changed to "No Dial-Out".
indicates that COSO changed to No Dial-Out either because config-
ured Time Restrictions came into effect or you set COSO to Remote
and the remote site did not reject your call on the D channel. As a
result, COSO changed to No Dial-Out.
ISDN-51: Outgoing call to <Number> subaddress <x> rejected because the local call
number components are not configured properly.
indicates that either no ISDN number or, if a PBX is used, no PBX
Extension has been configured. Enter the respective number in the
ISDN-Controller Interface Configuration.
Meldunge.pm6 27.05.97, 21:06273
… 272 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM NetWare MultiProtocol Router for ISDN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM NetWare MultiProtocol Router for ISDN in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info