559557
270
Zoom out
Zoom in
Previous page
1/279
Next page
System and Error Messages 271
ISDN-9: Charging threshold reached.
Warning issued by the ISDN Connection Monitor indicating that the
Charging Threshold was reached.
ISDN-10: Interface barred - physical up-time threshold reached.
indicates that the specified interface is barred because the maximum
physical up-time threshold was exceeded. To enable the interface
again, unload ISDNCMON and load it again.
ISDN-10: Interface barred - outgoing calls threshold reached.
indicates that the specified interface is barred because the maximum
outgoing calls threshold was exceeded. To enable the interface again,
unload ISDNCMON and load it again.
ISDN-10: Interface barred - charging threshold reached.
indicates that the specified interface is barred because the maximum
charging threshold was exceeded. To enable the interface again,
unload ISDNCMON and load it again.
ISDN-13: Incoming call from <Number> not acceptable - all B channels are busy.
indicates that an incoming call cannot be accepted because all B
channels are already in use at your side at the specified time.
ISDN-16: Outgoing Call to <Number> failed - Interface barred for outgoing calls.
indicates that the interface cannot be used to perform outgoing calls,
because Outbound Call Processing is disabled on the interface, the
Interface Status is disabled or COSO is set to No Dial-Out for the call
destination.
ISDN-17: Outgoing call to <Number> subaddress <x> failed - All B channels are busy.
indicates that an outgoing call to the specified number cannot be
established because all B channels are already in use at your side.
ISDN-19: Outgoing call to <Number> subaddress <x> rejected because the local WAN
call destination version must match.
indicates that the ISDN Call Destination Configuration for this call
destination is incorrect. Check it or, if you are upgrading from Net-
Ware MultiProtocol Router for ISDN v2.x or 3.0, load
ISDNCONV.NLM to convert database entries to version 3.1.
Meldunge.pm6 27.05.97, 21:06271
270


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM NetWare MultiProtocol Router for ISDN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM NetWare MultiProtocol Router for ISDN in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info