559557
271
Zoom out
Zoom in
Previous page
1/279
Next page
272 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
ISDN-20: Outgoing call to <Number> subaddress <x> rejected because the local inter-
face is still in use to <Number> subaddress <x>.
indicates that this interface is already used for a different ISDN
connection. If both numbers displayed are equal, check the configura-
tion of Local System ID and Remote System ID.
ISDN-21: Outgoing call to <Number> subaddress <x> rejected because the "Call Status"
is set to "Disabled".
indicates that you set the Call Status parameter in the "ISDN Call
Destination Configuration" to Disabled. Thus, outgoing calls to this
call destination are not allowed over the interface. If you want to
allow outgoing calls to this destination, you have to change the Call
Status and set it to Enabled.
ISDN-22: Outgoing call to <Number> subaddress <x> rejected because "Outbound Call
Processing" is set to "Disabled".
Since the interface cannot process outgoing calls, the call was rejected.
ISDN-23: Incoming call from <Number> subaddress <x> rejected because "Call Accept-
ance" is set to "Only Registered Numbers: CLI" or "...: CLI and Caller-Specified" and this
number (CLI) is not or not properly configured to be accepted.
indicates that the CLI number delivered over the D channel by the
remote site is not configured or not configured properly in the Call
Acceptance Database.
ISDN-24: Call to <Number> subaddress <x> rejected because the PPP LCP negotiation
failed.
indicates that the router was not able to negotiate the PPP LCP with a
remote site and therefore the call was rejected.
ISDN-25: Starvation timeout expired.
indicates that the remote peer of a connection is not answering.
ISDN-26: Calculated self-learning timeout <Period>.
shows the calculated selflearning timeout when
- you set up a physical connection and the selflearning timeout has
been calculated for the first time.
Meldunge.pm6 27.05.97, 21:06272
271


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM NetWare MultiProtocol Router for ISDN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM NetWare MultiProtocol Router for ISDN in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info